PXE-C80-88

XENON OÜ Verified independent store

→

OPTIM8 8-Channel DSP Amplifier with Automatic Sound Tuning PXE-C80-88 With introduction of the Alpine OPTIM8, we have eliminated the pain and confusion that usually goes along with trying to tune your system's sound using a digital signal processor or DSP/amplifier by making an amplifier that tunes itself. The 8-channel PXE-C80-88 DSP amplifier features automatic sound tuning and High-Definition performance so you'll experience exceptional fidelity, clarity, balance, and impact in your music without having to spend hours fiddling with controls and testing devices. Matrix mixing allows for summing and input/output signal management. Fully adjustable high-pass, low-pass, and band-pass filters, plus 31-band equalizers on every channel match the sound to your speakers and smooth out any hot spots or dips in the response due to your vehicle's interior. The delay feature lets you center the stereo image for your listening position. After initial setup using your PC device, all adjustments can be made automatically using the PXE-C80-88's control app on your iPhone using its built-in mic, or with your PC using a separate measurement microphone, like the Alpine KTX-CSP1. PC users can make all the sound adjustments manually to create a more personalized soundscape. While the PXE-C80-88 can act as a stand-alone processor for use with your own aftermarket amplifiers, its built-in 8-channel amp has plenty of power to run your system. It puts out six channels of 35 Watts RMS each to speakers with 4 Ohm impedances or 70 Watts RMS each to speakers with 2 Ohm impedances — so it'll work equally well with factory and aftermarket speakers — plus two channels that can each produce 130 Watts RMS at 4 Ohms or 260 Watts RMS at 2 Ohms, to power louder mid-bass drivers and subwoofers. Product information Alpine OPTIM8: A Fresh Approach to Car Audio Tuning The groundbreaking Alpine OPTIM8 is the ultimate all-in-one solution designed to effortlessly optimize and amplify any sound system with remarkable precision. The powerful DSP amplifier features Eilex PRISM™ technology, which presents a fresh approach to perfecting car audio. It measures frequency response using the Acoustic Power Volume Density (APVD) method, simultaneously correcting time and phase alignment errors in speaker systems. The technology aims to ensure that the output sound is as close as possible to the original source, offering remarkable musicality and intelligibility. This happens automatically and takes the user no longer than 5 minutes. All-In-One Solution Enhance your factory or aftermarket radio and sound system with the Alpine OPTIM8. Featuring a built-in 8-channel amplifier with Hi-Res Audio playback up to 96kHz/24Bit, the OPTIM8 is the all-in-one sound solution to amplify and effortlessly sound-tune your system in minutes. Flexible Application The OPTIM8 gives you the flexibility to use your factory radio and sound system or tie in an aftermarket radio and sound system. The built-in amplifier boasts 35W x 6 @ 4Ω + 130W x 2 @4Ω or 70W x 6 @2Ω + 260W x 2@ 2Ω, being able to power a full sound system. Digital inputs include Coax and USB (DAC) while a high-level speaker input of up to 26V allows the OPTIM8 to connect to a factory amplifier. Automatic Sound Tuning Tune your entire sound system in under five minutes with the innovative auto-tuning capabilities of the Alpine OPTIM8. The Alpine OPTIM8 removes all the complexities of tuning a sound system by providing a simple, self-guided process via the OPTIM iPhone App (iPhone/iPad) or PC Software with the KTX-CSP1 External Mic kit (sold separately) to quickly and precisely measure your vehicle's interior. Alpine’s Auto-EQ, powered by Eilex PRISM™ and VIR Filters, simplifies the sound tuning process. It provides on-screen instructions, so the user can easily make a precise measurement of the car’s system. After the measurement, the PC Software’s or OPTIM iPhone App’s graphical tuning interface provides real-time results so that users can quickly and intuitively perfect their system’s audio. During the measurement process, the user moves the optionally available KTX-CSP1 tuning-microphone (or iPhone) throughout the car’s cabin, capturing hundreds of measurement points. The Auto-EQ process is intelligent enough to ignore outlier information. The result is a consistent and highly objective analysis of the car’s system every time. Eilex PRISM™ Technology The built-in Eilex PRISM™ technology measures the frequency response utilitzing the one of its kind Acoustic Power Volume Density (APVD) measurement. The ultra high performance VIR (Variable Impulse Response) DSP Filters simultaneously correct frequency, time and phase alignment errors in speaker systems. The technology aims to ensure that the output sound is as close as possible to the original source, offering remarkable audio clearity. Key benefits of Eilex PRISM™ include dependable measurement results - independent of operator or environment, while the newly developed VIR Filters outperform conventional DSP filters in every aspect. Hi-Res Audio Certified The Alpine OPTIM8 Amplifier is Hi-Res Audio Certified and able to reproduce frequencies from 10Hz to 45kHz. This ultra-wide bandwidth helps elevate your music to a whole new level of clarity and nuance to achieve a level of detail far closer to that of the original studio recording. Customized Listening Experience Tune your system in real-time using the tuning tools, like crossover adjustments and time correction, to create an experience that’s tailored to your ideal listening position or music genre preference. Use any of the six included presets to save your favorite tuning adjustments and access on the fly using the included OPTIM8 controller. Audiophile Tuning Microphone The optionally available KTX-CSP1 microphone is the perfect tuning companion for the Alpine OPTIM8 DSP amplifier. It plugs right into your PXE-C80-88 and provides the PC-based tuning control Software with the high-quality audio signal necessary for the OPTIM8 processor to produce accurate and high-fidelity sound adjustments automatically. The included 3-meter high-quality cable ensures balanced signal and power for the mic, and lets you move the mic to different locations when tuning your OPTIM8 system. Universal Wiring Harness and Adapter The optionally available KWE-PXE8-UNI is a universal wiring harness with Quadlock connectors, supporting the installation of the Alpine OPTIM8 for example in Volkswagen group, BMW and Mercedes Benz vehicles with Quadlock radio connectors. There is also an optionally available Quadlock ISO to Standard ISO adapter (KWE-FR1AU) available to support installations. The all-in-one solution to AMPLIFY and OPTIMIZE your car audio in minutes! Want better sound? Unleash the hidden potential of any sound system with the Alpine OPTIM8. This 8-channel Amplifier and Sound Processor with automatic sound tuning capabilities is the ultimate all-in-one solution to power and effortlessly fine-tune any car audio system in minutes. Watch as Alpine Brooks walks you through the overview, features, and setup to show you how you can get the most out of your car audio system. https://www.youtube.com/watch?v=SmT5vmKIoLE 00:00 - Intro 00:31 - Optim8 Overview & Features 03:01 - Auto EQ Sound Tuning Overview 07:56 - System Configuration & Setup 10:00 - Crossover Setup 14:01 - Anti-EQ Setup 15:03 - EQ & Time Correction Setup 18:51 - Saving Presets 20:32 - Auto EQ Overview 21:14 - Auto EQ In-Vehicle Setup Features & Specifications FEATURES General 8 Channel DSP Amplifier Hi-Res Audio Playback (96kHz/24Bit) Intuitive Real-time Sound Set-Up with 5 Minute Vehicle Self-Tuning Manual & Automatic Sound Tuning with PC App Control Automatic Sound Tuning with iPhone App (must be iPhone 10 or newer) Anti-EQ for OEM System (Eliminates Factory EQ Curve) Auto-EQ with APVD Collection which Quickly Creates a Flat Vehicle Response Compatible with the KTX-CSP1 PC Mic Tuning Kit (sold separately) Software PC Software OPTIM iPhone App SPECIFICATIONS Power Ratings Power Output (@4Ω 14.4V 1% THD): CH1-6: 35W, CH7-8: 130W Power Output (@2Ω 14.4V 1% THD): CH1-6: 70W, CH7-8: 260W RCA Output (@10kΩ 14.4V 0.1% THD): CH1-8: 4Vpp General Up to 8 speaker outputs with independent adjustable output level THD+N (High level: 2Vrms into 4Ω): ≤0.1% THD+N (RCA: 2Vrms into 10kΩ): ≤0.06% S/N Ratio (High level: 40k-AES17+A-weighted): ≥80dB S/N Ratio (RCA: 40k-AES17+A-weighted): ≥95dB Frequency Response: 20Hz-40kHz Input Voltage (High level): 26Vpp Input Voltage (RCA): 11Vpp Output Voltage (High level): CH1-6: 40Vpp, CH7-8: 70Vpp Output Voltage (RCA): 4Vpp Input Impedance (High level/RCA): >50kΩ System Sampling Rate: 192kHz/32bit Operating Voltage: 9~16V Operating Temperature: -20°C~+60°C Back Up Current (12.6V): ≤3mA REM Start Input: High level (H1-/H1+), ACC optional REM Start Output: 12V (0.2A) Dimensions & Weight (WxHxD): 220.5 x 54 x 225mm Weight: 2.4kg Related products KTX-CSP1 Audiophile PC Microphone Tuning Kit for the Alpine Optim8 PXE-C80-88 KWE-PXE8-UNI Universal Wiring Harness with Quadlock Connector for PXE-C80-88 KWE-FR1AU ISO Adapter Cable for Alpine OPTIM8 and KWE-PXE8-UNI Support Manual Download OM_PXE-C80-88_EN.pdf Show more