About the Alpine HDZ-653 Alpine Status high-resolution audio system Alpine designed its Status System components for high-resolution audio playback. Their Status Series digital receiver, amp, speakers, and subs were designed to work together and play your 192kHz/24bit digital music streaming files with high-quality, studio-level purity and sonic fidelity. Ready for high-resolution Alpine crafted their HDZ-653 6-1/2" 3-way component speaker system for listeners in search of excellent audio quality in the car. Using many of the same design and material elements as their flagship F#1 Status speakers, this speaker system optimizes the woofer, midrange driver, tweeter, and crossover for near-perfect sound from premium sources, like high-resolution audio files. Optimized for Alpine These Status Series speakers make a great addition to any high-powered system, thanks to power-handling up to 100 watts RMS, but you can unlock their full potential by pairing them with Status System components, which Alpine designed with high-resolution audio in mind. Alpine uses a carbon composite woofer cone and midrange driver for consistency across the speaker's ultra-wide frequency range, plus a special double gathered-edge surround, which helps minimize distortion and promote accuracy. Product highlights: 3-way component speaker system 6-1/2" carbon composite woofer with double-gathered edge surround 3-1/2" carbon composite midrange 1-1/4" dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency range: 55-40,000 Hz sensitivity: 88 dB warranty: 1 year MFR # HDZ-653 Item # 500HDZ653 California customers: Please click here for your Proposition 65 WARNING. What's in the box: If you need assistance accessing this owner's manual, please give us a call. Two woofers Two woofer grilles Two midrange Two midrange grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Eight M4 Screws (1-1/8") Sixteen M3 Screws (1-1/8") Eight speed-clips Eight flat washers Owner's manual Warranty information Important Notice On-line product registration information Features & specs General Speaker Size 6 1/2 Driver Design 3-way Woofer Design Cone Woofer Material Carbon Composite Woofer Surround Rubber Midrange Design Cone Midrange Material Carbon Composite Tweeter Design Cone Tweeter Material Carbon Composite Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included Black, Steel mesh, Plastic frame Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 88 Frequency Response 55 - 40k Hz Maximum RMS Wattage 100 Peak Power Handling (Watts) 300 Top-mount Depth (Inches) 2 11/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 9/16 Mounting Height (Inches) 0.35 Frame Width 6.696 Frame Length 6.696 Features Woofer: Alpine describes the woofer size as 6½, but because they require a larger cutout than a standard 6½ speaker, Crutchfield has traditionally referred to this size as 6¾. Please enter your vehicle information to confirm fit. Cone Material: The same carbon composite cone material is used for the woofers, midrange and tweeters, aiding the smooth transition between the drivers. Phase Plug: The woofers, midrange and tweeters all use an aluminum phase plug in the center of the cone to help produce a smooth, flat off-axis frequency response by preventing the high frequency sound waves from one side of the cone from interfering with sound waves from the other side of the cone. Tweeters: Each tweeter is housed in a tuned enclosure and designed to be flush mounted, with the mounting surface sandwiched between the tweeter flange and the threaded mounting ring. Tweeter Dimensions: Flush Mount Mounting Height 0.605" Mounting Depth 1.425" Cutout Diameter 2.435" Frame Diameter 2.74" Midrange: The midrange drivers are not a standard size; they are similar to a 3½, but have a different screw hole pattern. They are top mounted and have these dimensions: Depth: 1.548" Mounting height: 0.358" Flange height: 0.192" Cutout diameter: 3.087" Frame diameter: 3.778" Grille diameter: 3.7" Grille height: 0.5" Crossover: The passive crossovers allow some system flexibility; the tweeter output level, midrange output level, and crossover slope are adjustable. Tweeter Output Level: three jumper positions; choose -3 dB, 0 dB (flat), or +3 dB Midrange Output Level: two jumper positions; choose 0 dB (flat) or -3 dB Crossover Slope: two jumper positions; choose 12 dB/octave or 6 dB/octave Wire Connections: inputs and outputs are screw terminals; accept bare wire or spade connectors up to 0.315" wide (no wire is included with the speakers) Crossover Dimensions: Width: 7.2" Height: 2" Depth: 5.04" (plus wire)
Related
Related
Related
Related