About the Alpine HDZ-65C Alpine Status high-resolution audio system Alpine designed its Status System components for high-resolution audio playback. Their Status Series digital receiver, amp, speakers, and subs were designed to work together and play your 192kHz/24bit digital music streaming files with high-quality, studio-level purity and sonic fidelity. Ready for high-resolution Alpine crafted their HDZ-65C 6-1/2" 2-way component speaker system for listeners in search of excellent audio quality in the car. Using many of the same design and material elements as their flagship F#1 Status speakers, this speaker system optimizes the woofer, tweeter, and crossover for near-perfect sound from premium sources, like high-resolution audio files. Optimized for Alpine These Status Series speakers make a great addition to any high-powered system, thanks to power-handling up to 100 watts RMS, but you can unlock their full potential by pairing them with Status System components, which Alpine designed with high-resolution audio in mind. Alpine uses a carbon composite cone for consistency across the speaker's ultra-wide frequency range, plus a special double gathered-edge surround, which helps minimize distortion and promote accuracy. Product highlights: 2-way car speakers (pair) 6-1/2" carbon composite woofer with double-gathered edge surround 1-1/4" dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency range: 55-40,000 Hz sensitivity: 88 dB warranty: 1 year MFR # HDZ-65C Item # 500HDZ65C California customers: Please click here for your Proposition 65 WARNING. What's in the box: If you need assistance accessing this owner's manual, please give us a call. Two woofers Two woofer grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Four rectangular adhesive backed pads Eight 1-1/8" Woofer mounting screws Four 1-1/8" Crossover mounting screws Eight speed-clips Four flat washers Four 5" Zip ties Owner's manual Warranty information Important Notice On-line product registration information Features & specs General Speaker Size 6 1/2 Driver Design 2-way Woofer Design Cone Woofer Material Carbon Composite Woofer Surround Rubber Midrange Design --- Midrange Material --- Tweeter Design Cone Tweeter Material Carbon Composite Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included Black, Steel mesh, Plastic frame Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 88 Frequency Response 55 - 40k Hz Maximum RMS Wattage 100 Peak Power Handling (Watts) 300 Top-mount Depth (Inches) 2 11/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.35 Frame Width 6.702 Frame Length 6.702 The Alpine HDZ-65C replaces these items: Alpine X-S65C Features Woofer: Alpine describes the woofer size as 6½, but because they require a larger cutout than a standard 6½ speaker, Crutchfield has traditionally referred to this size as 6¾. Please enter your vehicle information to confirm fit. Cone Material: The same carbon composite cone material is used for both the woofers and tweeters, aiding the smooth transition between the drivers. Phase Plug: The woofers and tweeters use an aluminum phase plug in the center of the cone to help produce a smooth, flat off-axis frequency response by preventing the high frequency sound waves from one side of the cone from interfering with sound waves from the other side of the cone. Tweeters: Each tweeter is housed in a tuned enclosure and designed to be flush mounted, with the mounting surface sandwiched between the tweeter flange and the threaded mounting ring. Tweeter Dimensions: Flush Mount Mounting Height 0.605" Mounting Depth 1.425" Cutout Diameter 2.435" Frame Diameter 2.74" Crossover: The passive crossovers allow some system flexibility; the tweeter output level and crossover slope are adjustable. Tweeter Output Level: three jumper positions; choose -3 dB, 0 dB (flat), or +3 dB Crossover Slope: two jumper positions; choose 12 dB/octave or 6 dB/octave Wire Connections: inputs and outputs are screw terminals; accept bare wire or spade connectors up to 0.315" wide (no wire is included with the speakers) Crossover Dimensions: Width: 5.32" Height: 1.59" Depth: 3.94" (plus wire)
Related
Related
Related
Related