About the Alpine R2-S69C Your entry to high-res audio Enjoy all the details in your favorite high-resolution audio files with this set of Next-Generation R-Series component woofers, tweeters, and convenient in-line crossover systems. Using technology developed for their flagship F#1 Status Series, Alpine built these speakers to be fun for enthusiasts interested in high-resolution audio playback. Their ultra-wide frequency response ensures a detailed, authentic sound, and thanks to power-handling up to 100 watts RMS, you can play 'em loud! Minimal distortion Alpine optimizes their R2-S69C 6"x9" 2-way component speaker system for near-perfect sound from premium sources. The woofer's combination of a highly rigid aluminum frame and a lightweight glass-fiber reinforced woofer cone helps minimize distortion. The high-amplitude multi-roll surround maximizes impact while maintaining linearity, so you'll get punch with minimal distortion. And speaking of a little more punch, the woofer's ferrite magnet and large motor structure will pump up the mid-bass in your music. Loud and fun All the exquisite detail you need is handled by the 1" magnesium hard dome tweeters, which contribute to the "loud and fun" sound associated with Alpine's R-Series. Because tweeters can be challenging to install, Alpine provides in-line crossover systems, a threaded removable housing, and a swivel-mount design to make sure you have what you need to make them sound their best. Product highlights: 2-way component speaker system 6"x9" glass-fiber woofer cone with High-Amplitude Multi-Roll surround 1" magnesium hard dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency range: 60-40,000 Hz warranty: 1 year MFR # R2-S69C Item # 500R2S69C California customers: Please click here for your Proposition 65 WARNING. What's in the box: If you need assistance accessing this owner's manual, please give us a call. 2 Woofers 2 Bottom mount brackets 2 Woofer grilles 2 Tweeters (each has an attached 30" length of wire terminated with quick slides) 2 Tweeter crossovers (each has attached input and output wires) 2 Tweeter grilles (installed) 2 Flush mount housings (with tweeters installed) 2 Flush mount retention rings 2 Angled surface mount housings 2 Stealth (factory location) brackets 2 Round self-adhesive pads 2 Rectangular self-adhesive pads Eight 1-1/8" Screws Eight M4x60mm Machine screws (with split lock washers attached) Four 5/8" Screws 8 Split lock washers 8 Flat washers Eight M4 Hex nuts 8 Large speed-clips 4 Small speed-clips Four 5" Zip ties Warranty information On-line product registration information Important Notice Template and specs on box Features & specs General Speaker Size 6X9 Driver Design 2-way Woofer Design Cone Woofer Material Glass-Fiber Woofer Surround Rubber Midrange Design --- Midrange Material --- Tweeter Design Dome Tweeter Material Magnesium Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included Black, Steel mesh, Plastic frame Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 90 Sensitivity at 2.83 volts N/A Frequency Response 60 - 40k Hz Maximum RMS Wattage 100 Peak Power Handling (Watts) 300 Top-mount Depth (Inches) 3 Bottom-mount Depth (Inches) 3 3/4 Cutout Diameter or Length (inches) 0 Mounting Height (Inches) 0.476 Frame Width 6.495 Frame Length 9.292 The Alpine R2-S69C replaces these items: Alpine R-S69C.2 Features HAMR Surround: The R-Series speakers incorporate Alpine's patented High-Amplitude Multi-Roll (HAMR) surround, a technology developed for Alpine subwoofers that maintains control and stability at higher volume levels. HAMR surrounds combine increased cone area and long linear cone excursion for deep, powerful bass response. Tweeter Mounting Options: The tweeters come installed in a flush-mount housing. Once mounted, the tweeters pivot approximately 15° in any direction, to improve the stereo image. Angled surface-mount housings are also included, or you can install the tweeters behind factory grilles using the included stealth mount brackets. The stealth mount brackets can be top or bottom mounted; they have multiple tabs that can be removed when not needed. The installed tweeter dimensions are: Flush Mount (swivel) Angled Surface Mount Factory Location (bottom mount) Factory Location (top mount) Mounting Depth 0.65" N/A 0.653" 0.6" Mounting Height 0.378" 1.325" 0" 0.075" Cutout Diameter 2.0" N/A N/A N/A Frame Diameter 2.285" 1.82" x 1.71" 1.726" 1.726" Crossovers: The included 12 dB/octave in-line high-pass crossovers are wired between the woofers and tweeters. Each woofer has two positive and two negative terminals, one for input from the amplifier, and one for output to the tweeter (via the in-line high-pass crossover). The 12" output wires attached to the crossovers are terminated with quick slides that connect to the terminals on the 30" wires attached to the tweeters. The quick slides on the attached 31" input wires connect to the extra terminals on the woofers. Because the tweeter crossovers are separate, the system can be bi-amped. Two-sided tape is included to mount the high-pass crossovers; their dimensions are: Width: 1½" Height: 1¼" Length: 2?" (3" including wire) Tweeter Output Level: Each crossover has three tweeter output level options, allowing you to precisely tune the high frequencies to the car interior and tweeter placement. Using the supplied jumpers select -3 dB, 0 dB (flat), or +3 dB.
Related
Related
Related
Related