About the Alpine R2-SB10V Twice the bass Alpine's Halo Series subwoofer enclosures make it simple to add bass (and more bass) to your system. You'll get great bass response from a single box, and when you're ready to expand your system you can add a second enclosure and the optional linking kit to create a two-speaker system with double the impact. Laying it down The R2-SB10V comes loaded with Alpine's updated R2-W10D4 subwoofer wired for 2-ohm impedance, for solid bass response at power levels up to 750 watts RMS. The ported enclosure is made of rugged 3/4" MDF with a stylish black carpet covering and is tuned to 36 Hz to maximize the lows. Putting it together Two R2-SB10V enclosures can be linked using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure's trim for a neat, coordinated look. Product highlights: 10" ported subwoofer enclosure loaded with Alpine's R2-W10D4 subwoofer linkable to second R2-SB10V enclosure with linking kit (sold separately) Kevlar-reinforced pulp cone Santoprene rubber surround power handling: 750 watts RMS (2250 watts peak) frequency response: 26-200 Hz sensitivity: 82.3 dB 2-ohm impedance dimensions: 16.13" W x 12.75" H x 14.94" D warranty: 1 year MFR # R2-SB10V Item # 500R2SB10V California customers: Please click here for your Proposition 65 WARNING. What's in the box: Ported enclosure loaded with one R2-W10D4 subwoofer driver Warranty information Product registration information Safety notice Features & specs General Woofer Size (inches) 10 Speakers Per Box 1 Woofer Material Kevlar-reinforced pulp Enclosure Type Ported Color Black w/silver trim Pieces in System 1 Width (inches) 16-3/16 Height (inches) 12-3/4 Depth (inches) 15 Connector Type Binding post Frequency Response 26-200 Hz Power Handling (Watts RMS) 750 Power Handling (Watts Peak) 2250 Sensitivity 82.3 dB Impedance 2 ohms Parts Warranty 1 Year Labor Warranty 1 Year Features Driver: The Alpine R2-SB10V loaded enclosure features a single R2-W10D4 10", dual 4-ohm voice coil subwoofer driver. The next generation R-Series driver features a Kevlar-reinforced pulp cone with a polypropylene/ceramic composite dust cap and a High-Amplitude Multi-Roll (H.A.M.R.) surround. The driver also features two large double-stacked strontium-ferrite magnets for increased motor strength and excursion. A custom-designed cast aluminum frame and a dual-flare pole vent optimize airflow for driver cooling. Both 4-ohm voice coils are wired in parallel for a single 2-ohm connection. Power Handling: The R2-SB10V can handle 300-750W RMS (2250W peak). Enclosure: The R2-SB10V's ported enclosure design has been optimized for use with the R2-W10D4 driver, and has been tuned to 36Hz for deep, powerful bass. It features a rigid, heavy-duty MDF construction that's been wrapped in attractive black carpet, with a smooth black finish and silver trim on the front face. Enclosure Linking (Optional): The R2-SB10V's unique design allows it to be linked to an additional R2-SB10V (sold separately) using the optional KTX-H10 linking kit. This features an aluminum rear link-plate and an attractive, steel-reinforced ABS front linking bracket that securely locks the two enclosures together. Subwoofer Grille (Optional): The Alpine R2-SB10V does not include a grille for the driver, but can be used with the optional Alpine KTE-10G.3 steel mesh grille (sold separately). Terminals: A single rear-panel terminal cup houses a pair of binding posts for connection, accepting up to 12 ga. speaker wire. Both of the driver's voice coils are wired in parallel for a single 2-ohm load. Specifications: Driver: Single 10" (R2-W10D4) Impedance: 2-Ohms (dual 4-ohm voice coils parallel-wired) Power Handling: 300-750W RMS (2250W peak) Enclosure: Ported Frequency Response: 26-200Hz Port Tuning: 36Hz Dimensions: W = 16.13", H = 12.750", Depth = 14.94"
Related
Related
Related
Related