S-Series Mono Power Amplifier - RMS Power Ratings 1 x 600W @ 2 Ohms S2-A60M The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget. The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat. A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration. The New 2023 S-Series Amplifiers Entry-level sound just got elevated with the S2-A60M Mono Amplifier. Its sleek design houses an Alpine Class-D amplifier circuit with 600 Watts of powerful bass performance. Unparalleled Power Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1 Ohm or 2 Ohm drive, this mono amp is capable of driving even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. Flexible Application New to the Next-Generation S-Series amplifiers is a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system. Easy Control Access The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier. Optimal Power Matching With the capacity to deliver 600 Watts of power at 1 Ohm, the S2-A60M is fully equipped to provide ample power to either a single Alpine S-Series 10” or 12” subwoofer, or two S-Series 8” subwoofers, ensuring exceptional sound quality and optimal performance. Made for S-Series Speakers & Subs The S-Series amplifiers are designed to perfectly match the Alpine S-Series speaker and subwoofer line for perfect system building. S-Series components are designed to for customers that want to build a great sounding system without breaking the bank, for a fun and great sounding experience including Hi-Res Audio capabilities. Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget Watch as Alpine Brooks gives you an overview of the next generation of Alpine S-Series Amplifiers, which are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on a budget. If you're looking to upgrade your car's factory audio system, the S-Series Amplifiers from Alpine could be for you. 00:00 - Intro 00:26 - Unparalleled Power 00:56 - Models & Overview 01:12 - Key Features of the 4 & 5 Channel Amps 02:41 - Key Features of Mono Amps 03:55 - Wrap Up FEATURES Install Terminal Layout: Two-sided Included terminal covers Screw terminals (for speaker and power cables) General Class-D Amplification (Digital) Channel Design: Mono Channel Side panel controls Thermal Management Control Top Mounted LED Power/Status Indicator Speaker Level Input 3 turn-on modes (DC HI, Remote HI, Remote LO) Input Channel Selector Switch for Subwoofer Crossover: Variable Low-pass Filter (LPF) Adjustable Gain Control Bass EQ Remote Bass Control (RUX-KNOB2) Ready SPECIFICATIONS RMS Power Ratings Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 600W Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 600W Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 330W Sound Tuning Crossover: Variable LPF: 50-400Hz (-24dB/oct) Bass EQ (+12dB) General Power Requirements: 14.4 V.DC (9 - 16 V allowable) Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V High Level Input with automatic power on Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz THD+N (@ 10W into 4 Ohms): 1000 Weight: 2.2kg Dimensions Heat Sink (WxHxD) mm: 220 x 57 x 210 Manual Download OM_S2-A120M_S2-A60M_EN.pdf
