Discontinued About the Alpine SS-SB10 Big bass in a small space When you're trying to upgrade your system for bigger bass, sometimes you're stuck with small spaces to work with. Alpine's S-Series shallow subwoofer enclosures are their smallest sub boxes yet, made to fit into spots other subs can't. Advanced design The SS-SB10 features a 10-inch S-Series shallow subwoofer with an innovative front-mounted neodymium motor design that reduces speaker depth while preserving cone movement. The rugged polypropylene cone handles up to 300 watts RMS (600 watts peak). With an IPX-rated water-resistant polymer enclosure, this box stands up to tough conditions. You can adjust the enclosure's four mounting brackets to make installation easier. Product highlights: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D warranty: 1 year MFR # SS-SB10 Item # 500SSSB10 What's in the box: If you need assistance accessing this owner's manual, please give us a call. Subwoofer enclosure loaded with one 10" S-Series subwoofer 4 Mounting brackets 4 Foam pads with adhesive backing Eight 3/4" screws Four M5x12mm machine screws 4 Lock-washers Installation manual (Eng/Fren) Warranty information Product registration information Safety notice Features & specs General Woofer Size (inches) 10 Speakers Per Box --- Woofer Material Polypropylene Enclosure Type Sealed Color Black Pieces in System 1 Width (inches) 18-11/16 Height (inches) 4-3/8 Depth (inches) 12-1/2 Connector Type Spring post, 12 AWG Frequency Response 35-200 Hz Power Handling (Watts RMS) 300 Power Handling (Watts Peak) 600 Sensitivity --- Impedance 2 ohms Parts Warranty 1 Year Labor Warranty 1 Year Features Overview: The Alpine SS-SB10 subwoofer enclosure features a single Alpine S-Series 10" Shallow-Mount subwoofer mounted in a compact, down-firing enclosure. This combination provides deep, clear bass while taking up minimal space in your vehicle. Enclosure: The sealed enclosure is made of a durable polymer composite, providing exceptional acoustic efficiency and deep powerful bass. The enclosure's low-profile, down-firing construction allow the sub to be mounted in tight spaces. Mounting: The SS-SB10 subwoofer enclosure includes four mounting brackets that can be installed in each corner of the enclosure. The brackets can be oriented facing out the sides of the enclosure or out the ends, providing flexible mounting options. Mounting hardware is included. Speaker Terminals: A single pair of spring-posts are mounted on one side of the enclosure in a recessed terminal cup, accepting wire up to 12-gauge. The 10" subwoofer's dual 4Ω voice coils are internally wired to present a 2Ω load at the spring posts. Power: The Alpine SS-SB10 enclosed subwoofer can handle 300W RMS (600W peak). 10" Subwoofer Driver: The pre-installed Alpine S-Series 10" driver features a front-mounted magnet motor, allowing the enclosure to have a shallow footprint while providing deep, clear bass. The subwoofer driver features a powerful neodymium magnet and a 2" dual-gap voice coil structure, providing 22mm of peak-to-peak linear excursion. Alpine's Gen2 DD-Linear Magnetic Circuit technology provides exceptional control over the motor, resulting in precise bass control and lower distortion. Specifications: Driver: 10" Shallow-mount Power: RMS: 300W Peak: 600W Impedance: 2Ω (dual 4Ω voice coils, internally wired in parallel) Frequency Response: 35Hz - 200Hz Enclosure Type: Sealed, down-firing Enclosure Material: Composite Dimensions: Width: 18.63" Height: 4.32" / 4.50" (w/ brackets) Depth: 12.50"
Related
Related
Related
Related