ClayMagic Red Medium grade bar 200 gramClay Magic® Blue Fine Grade Clay Bar (200 grams) effectively smooths your vehicle’s finish by removing surface contaminants like paint overspray, tree sap, bug residue, industrial fallout, and stubborn dirt. Safe for all vehicle types, one 200-gram bar can handle up to 20 detailing sessions depending on contamination. Claying takes about 15 minutes and is easy to perform. Simply shape the clay into an oval, use with Clay Magic® Clay Lube on a clean, cool surface, and gently rub back and forth in several passes. Regularly fold the clay to expose a clean surface, and store it properly to maintain effectiveness. Suitable for refinish and factory paints, glass, chrome, fiberglass, and other smooth surfaces. Avoid using if dropped to prevent scratches. DIRECTIONS: Form Clay Magic® into an oval shape. Spray Clay Magic® Clay Lube onto a 3'x3' section of a clean, cool and dry surface. Gently rub the clay bar over the area using a back-and forth motion in 5 to 6 passes. Wipe the surface dry. To clean the clay bar, simply fold it in half and reshape into an oval shape. Store the clay bar in a clay container or plastic baggie with a light spray of lubricant. Follow CM1200 with a quality polish to remove any micro scratches left from the medium-grade clay. NOTE: DISCARD BAR IF DROPPED ON THE GROUND. SURFACE APPLICATIONS: Refinished paint, factory paints, clear coats, acrylics, enamels, and lacquer paints. It can also be used on glass, chrome, fiberglass, plastic, and many other smooth hard surfaces for contamination and paint overspray removal. HELPFUL TIPS: Always make sure the surface you intend to clay is thoroughly washed, dried, and cool. Fold the clay frequently to ensure clean clay is used. It is best to fold the clay after each main body panel is completed. Most of the contamination removal is going to be on the upper portions of the vehicle (above the side moldings). Do not use clay without a clay lubricant. The lubricant helps glide the clay and loosen imbedded surface debris. Do not use the clay if dropped on the ground. This collected dirt may add surface scratches.
