Analog Discovery 2 Pro Bundle Includes the Analog Discovery 2 USB Oscilloscope, Logic Analyzer and Power Supply 30MHz bandwidth oscilloscope / 12MHz bandwidth waveform generator Comes with the BNC Adapter Board, probes and test clips The Analog Discovery 2 Pro Bundle can be used within a wide range of projects. With the BNC adapter and scope probes, professional or experienced engineers can access the full 30MHz bandwidth oscilloscope and 12MHz bandwidth waveform generator. Analog Discovery 2 USB Oscilloscope, Logic Analyzer and Power Supply The Analog Discovery 2 USB Oscilloscope, Logic Analyzer and Power Supply is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by Xilinx University Program, Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analog and digital circuits in virtually any environment, in or out of the lab. 16-channel digital logic analyzer (3.3V CMOS, 100Msample/sec) Single channel voltmeter (AC, DC, ±25V) Digital Bus Analyzers (SPI, I²C, UART, Parallel) Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS) The analog and digital inputs and outputs can be connected to a circuit using simple wire probes; alternatively, the Analog Discovery BNC Adapter and BNC probes can be used to connect and utilize the inputs and outputs. Driven by the free Wave Forms 2015 (Mac, Linux and Windows Compatible) software, Analog Discovery 2 can be configured to work as any one of several traditional instruments. Mini Test Clips The Mini Test Clips (6pk) allow the analog discovery's signal wires to be connected to component leads, wires, and other circuit components. Analog Discovery BNC Adapter Board The Analog Discovery BNC Adapter Board is intended to be used with the Analog Discovery tool to enable the use of standard BNC-terminated test leads and probes. It provides BNC terminations to each of the two oscilloscope channels on the Analog Discovery. Each channel of the oscilloscope can be selected as AC or DC coupled by adjusting the jumper that is located behind that channel's BNC input connector. In addition, the two AWG channels are also equipped with BNC terminations, and each channel can have either the 50-ohm or the 0-ohm termination selected. This enables the user to match the Analog Discovery's output impedance with either standard 50-ohm test leads or to be directly tied to the lead.
Related
Related
Related
Related