Note: lead time on 3d printed ferrules can be up to 5-10 business days. We do our best to fill orders as quickly as possible but our 3d printed ferrules are made in batches and it can take several days to replenish inventory. Please note that paying for an upgraded, faster shipping method will NOT make the printer run faster. It will just make the transit time shorter after we pass your order off to the shipping service of your choice. $22.50 for a set of 3 $49 for a set of 10. Add a matching ferruled pitch tool to a 10-pack for $39. Black spiral on top of white and blue rings. Slightly raised 3d texture on the staircase seam. 3d printed in ABS. 1" tall. Designed for .355" taper tipped steel shafts. They'll work with .370" tip shafts and graphite irons shafts with steeper taper profiles as well, but will need to be reamed out slightly before installation. If a ferrule is too snug to slide up a shaft to where it needs to sit, do not ram it up the shaft with brute force. Ream out the inner diameter until it fits. Installation instructions: These 3d printed ferrules install similarly to traditional ferrules with one key exception: we advise against using force to slide the ferrule up the shaft for any 3d printed design that has vertical seams between colors. 3d printed ferrules with intricate designs are a bit more delicate where 2 colors meet and form a vertical seam. Using force to push a ferrule that is too snug higher up a shaft can cause cracking or splitting at the seam. Instead, if a ferrule is too snug for your shaft, we recommend widening the inner diameter of the ferrule with a cylindrical file, a drill, or sandpaper until it can slide up to where it will sit above the hosel.
