APHIX Silicone Adhesion Promoter will temporarily adhere most surgical tapes, bandages, dressings, etc. to silicone rubber surfaces including training mannequins, devices, etc. This non-VOC formula is a low viscosity liquid that brushes on easily and dries quickly. One application lasts for repeated use. APHIX Silicone Adhesion Promoter can be removed with NOVOCS GLOSS silicone solvent. Properties Important: Shake APHIX Silicone Adhesion Promoter container well before using.Preparation Clean the silicone surface with NOVOCS GLOSS silicone solvent to remove any oils which may affect the bond of the APHIX adhesion. Allow surface to dry for 2 minutes. APPLICATION & REMOVAL Application APHIX Silicone Adhesion Promoter can be applied using a cotton swab, non-latex sponge or small fine bristle brush. Apply adhesive to the silicone surface. Allow APHIX Silicone Adhesion Promoter to dry for 10 minutes. APHIX Silicone Adhesion Promoter will not work unless it has thoroughly dried. Be sure to securely replace cap after each use as contents will evaporate. Once APHIX Silicone Adhesion Promoter has dried, apply the adhesive surgical tape, bandage or dressing. One application of APHIX Silicone Adhesion Promoter lasts for repeated use. Removal of APHIX APHIX Silicone Adhesion Promoter can be removed using NOVOCS GLOSS silicone solvent.Documentation Technical Bulletin
