Aqua Master pH Temp Meter P50 Pro2 The Aqua Master pH Temp Meter P50 Pro2 is a testament to precision. Its fully calibrated system provides highly accurate readings of both pH and temperature, ensuring unparalleled precision in your measurements. IP67 waterproof rated Large, easy-to-read, digital display Fully calibrated Replaceable probes Using the Aqua Master pH Temp Meter P50 Pro2 is a breeze. Here's a step-by-step guide to help you get started: Before first use – soak your pH meter for 12 hours in tap water. Remove the protective cover. With distilled water, gently clean the electrode and dry it off. To start the meter, press the on/off button. Insert the meter into the solution upright, up to the edge and stir gently. Wait a few seconds for the correct value to appear on the display. To switch between Celsius and Fahrenheit, press the C/F button. After use, it's essential to rinse the electrode with water and press the on/off button to turn off the meter. This simple maintenance step helps prolong your pH meter's life, ensuring it remains accurate and reliable for years to come. Aqua Master Replacement Electrode P50 – suitable for the pH Temp meter P50 Pro. How to replace the electrode: Properly unscrew the sealing ring in the lower part of the meter. Remove the defective/old electrode by gently pulling it. Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode. Check that the rubber seal is properly placed. Tightly tighten the sealing ring. Calibrate the meter as described in this manual. The meter is now ready for use.
