Aqua Computer flow sensors are easily integrated into your water cooling loop and allow continuous flow monitoring.Coolant flowing through the sensor drives a rotor/impeller, a contactless magnetic sensor system detects the rotation speed. Each sensor is calibrated for optimum bearing play to achieve minimum operation noise. The sensor delivers reliable readings over a wide range of flow rates between 40 l/h and 1000 l/h (approximately 10 to 260 US liquid gallons per hour) and is therefore perfectly suited for most water cooling systems. Due to a symmetrical construction, the flow direction is irrelevant. Furthermore, the sensor may be installed in any orientation. Due to its low flow resistance, this sensor is a perfect match for high flow water cooling systems.The connection threads are G 1/4 and can be used with virtually any tube dimensions.For sensor installation, two screws are included in delivery.Compatibility list:aquaero 6 XT / PRO / LT (53145, 53146, 53206, 53234, 53250, 53251, 53253, 53262, 53263)aquaero 5 XT / PRO / LT (53089, 53090, 53095, 53125, 53249, 53252)aquaero 4.00 / 3.07 (53030, 53031, 53035, 53045, 53048, 53064, 53075, 53076)aquastream ULTIMATE (41108)aquastream XT (41059, 41060, 41061)D5 NEXT (41118)farbwerk 360 (53279)poweradjust 3 (53166, 53167)poweradjust 2 (53082, 53083)poweradjust (53049, 53054)aquaduct 240 Pro mark III (11213)aquaduct 360 eco+ (11212, 11233)cuplex kryos NEXT with VISIONVISION connection terminal for kryographics (23664, 23665, 23666, 23667)VISION Touch (53232, 53235)QUADRO (53256)OCTO (53286)Scope of delivery:One flow sensorOne connection cableTwo screws and spacersTechnical details:Dimensions: ca. 51 x 42 x 30 mmConnection threads: G 1/4For flow signal evaluation, a device with flow sensor input (see compatibility list) is required and is not included in delivery!
