Andromeda Research Labs AR32 Locksmith Eeprom Reader Kit #1 WHAT’S INCLUDED IN THE KLS-1 KIT HARDWARE The KLS-1 kit includes the following items: 1 - EPROM+ programming system 2 - ASERSM1A surface mount serial eeprom adapter 3 - Surface mount clip with cable and plug (#ASOIC8) 4 - Surface mount probe set with cable and plug (#SMP8), 5 - Clonable Honda RED and BLACK keys required to reflash a RED key Honda, 6 - RESYNCHRONIZATION BLOCK required to synchronize a reflashed Toyota or Lexus small black box immobilizer to the vehicle ECU. Included Documentation 1. SERIAL EEPROM TUTORIAL - 93C56 (AUTOMOTIVE VERSION) This tutorial (directed at automotive applications) describes how to use the system by providing a series of hands-on exercises using an actual 93C56 serial eeprom. Although this tutorial covers more than just locksmith applications, it will teach you to use the additional capabilities of your KLS-1 package. IMPORTANT: Perform the exercises in this tutorial before you begin working with any modules. 2. USING THE ASERSM1A SERIAL EEPROM IN-CIRCUIT INTERFACE ADAPTER This document describes how to use the ASERSM1A adapter, including how the plug is attached and the purpose of the voltage selection slide switches. IMPORTANT: Read this document and become familiar with the purpose of the slide switches as it will allow you to work suc- cessfully with most parts in-circuit and confirm a “GOOD READ” of eeprom data. Also note the position of the black cable plug when installed on the adapter: The BROWN wire is always on the right, below the arrow. 3. EEPROM+ PROGRAMMING SYSTEM USER MANUAL This is the operation and user manual provided with the standard EEPROM+ system. Read this manual for installation and use information. Please note: AR32 requires 32 Bit Windows XP computer with a Serial Port. see PANASONIC TOUGHBOOK CF-29
