Archer Plus SR12+

Aloft Hobbies Verified independent store

→

The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus series receivers include some new features. Firstly an enhan ced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST V2 D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be recorded. The Archer Plus SR12+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.). The stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes. The SR12+ receivers have 12 configurable channel ports*, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The SR12+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR12+ can be used as a Primary receiver in a redundant system by setting a port (Channel Port 1) as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the setup. The SR12+ also provides a socket that can be used to connect the switch panel to enable the built-in Power Switch function, and it uses a set of standard XT30 plugs which also provides a safe and efficient way to provide power. By utilizing current protection on the channel ports, the connected device will be protected. (*Some features require the support of ACCESS and ETHOS.) Features: Enhanced Anti RF-Interference Capability with more Solid RF Performance Smart-Matched ACCESS & ACCST V2 D16 modes Built-in 3-Axis Gyroscope & 3-Axis Accelerometer Sensor Basic Black-Box Data Record Function Built-in Power Switch Function | Match with Different External Switches (Optional) 12 Configurable Channel Ports* (PWM, SBUS, FBUS, or S.Port)(Note: In ACCST mode, SBUS Out is assigned on Pin11 & S.Port is on Pin12.) Supports Signal Redundancy (SBUS In) Full Control Range with Telemetry (FBUS / S.Port) Anti-Interference Capability for Spark-Ignition Engines Over-The-Air (OTA) Firmware Update External Battery/Device Voltage Detection Specifications: Dimension: 48.5×33×17.9mm (L×W×H) Weight: 21.5g Operating Voltage Range: 3.5 -10V (Recommend 2S Li-Batteries) Operating Current: ＜115mA@5V Continuous Current: ≤20A (power the device) ｜ instantaneous Current: ≤40A (to power the device) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX1 Dual XT30 Power Input Connector Compatibility: FrSky 2.4GHz ACCESS / ACCST V2 D16 capable transmitters 12 Configurable Channel Ports (ACCESS mode)CP1: PWM / SBUS Out / FBUS / S.Port / SBUS InCP2-12: PWM / SBUS Out / FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode) Show more