Please note: There is a minimum order quantity of 2 for this productFor bulk purchase more than 10 units, please contact our sales team for the bulk discount 1300 686 666. This product is currently not available for distribution in WA for standard promo shipping cost, please email us for pallet quotes or alternative products in WA. Description The Ares Barstool by Siesta is no ordinary plastic Stool. It’s extraordinary strength is due to the entire stool being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this stool will not fade or go brittle even in the sunniest weather conditions. Siesta’s Ares Barstool is built to last in busy commercial venues, indoor or outdoor. Features 5 years warranty Stackable Suitable for indoor and outdoor commercial use Made of UV stabilised polypropylene reinforced with glass fibre Dimensions (mm): 500L x 400W x 1080H Seat Dimensions(mm): 750 Seat Height x 360 Seat Width x 400 Seat Depth x 350 Seat Back Height x 390 Seat Back Width Unit Weight: 6.2kg SWL: 135kg Supplied assembled Weather resistant, UV Stabilised – Will not fade under direct sunlight Stocked in: Anthracite, Black, White, Chocolate, Taupe Made in Europe Product Brochure Please Note: Product Sizes, Weights & Colours may vary and are subject to change. Test result Tests Completed 1. Outdoor furniture - General safety requirements EN 581-1:20172. Seat and back static load test EN 1728:2012+AC:20133. Seat and back fatigue test EN 1728:2012+AC:20134. Leg forward static load test EN 1728:2012+AC:20135. Leg sideways static load test EN 1728:2012+AC:20136. Seat impact test EN 1728:2012+AC:20137. Foot rest static load test EN 1728:2012+AC:20138. Stability - EN 1022:2005 Seat & Back Static Load Test Seat Load (kg) Back Force (kg) Number of Cycles 204 55 10 x 10s 204 55 1 x 30 min Seat Front Edge Static Load Test Seat Load (kg) Number of Cycles 132 10 General Safety Requirements Edges of seat, back rest and arm rests rounded and chamfered All other parts: free from burrs, sharp edges and sharp points. Any load bearing part of furniture not come loose unintentionally Tubular Components Safety Requirements Absence of tubular components with diameter > 7 mm and < 12 mm with a depth > 10 mm. Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm Shear & Squeeze Points Safety Requirements Absence of shear and squeeze points, created by loads applied during normal use. Conformity to requirements of clause 5 of standard EN 581-1
