The humble badger is the namesake of Armattan's newest flagship. With a design based off of the Marmotte frame, the Badger updates it with removable arms: carefully designed to ensure a rock-solid construction. Features The Cage. This is the newest revision of Armattan's titanium cage; the same as on the Marmotte. And just in case you haven't heard what the perks of this cage are compared to any other, we'll run through them quickly here. Independent HD camera tilt means there's no need to deal with foam wedges for the front or back of your recording camera. A wide range of FPV cam tilt options. From 10 degrees to way too much. 1mm FPV-cam savers: these are designed to bend so your camera won't break. A minimised weight due to a state of the art, 6-axis milling process.And the best part? All of these perks come on top of the firm mount and incredible protection that you've come to expect from an Armattan product. The Arms. Since having removable arms is the major draw for this release, we wanted to specifically mention how they work. The arms mount up with two bolts and two sunk-nuts each. The sunk-nuts go straight into the 4mm baseplate, so there's no need to worry about delamination. When installed, the arms meet in the center of the baseplate, further locking down the construction. We're providing you with a remarkably solid, precise product, and we know that you will have full confidence in this frame. Other Details. This frame comes with tons of other bells and whistles. As you've come to expect, an extended-aluminum rear provides a protected mount for your VTX antenna no matter whether you use a TBS, SMA, or U.FL style connector. The frame maintains compatibility with 5.5 inch props for those of you who like to ride the line, and the long body means you can more easily fit an HD camera and a bigger lipo, even with high cam tilt. The FC can mount up on either the 30.5mm or 20mm options, and there are even 20mm rear provisions as well for a VTX or any other board. Add the differences in carbon and the extra hardware, and you're probably expecting this frame to be considerably heavier than the fixed arm version (the Marmotte). Well due to our experience in design and some clever optimisation, we've kept the difference down to 15g. You can thank us later. The Warranty I almost can't believe we're still having this conversation, but keep in mind that we'll never stop reassuring you. Full warranty protection. Cage. Carbon. Everything. Specifications Frame weight: approx. 130g Motor to motor: 236mm (5inch), 256mm (6 inch) Frame shape: Compressed X Main plate thickness: 4mm Arm thickness: 4mm Hardware: Steel bolts Titanium cage Aluminium standoffs Motor mount patter: 22xx FC stack mount: 20mm and 30.5mm compatible FPV camera mount: Mini-camera (21mm) FPV antenna mounts: TBS, SMA and U.FL compatible Max stack height: 20mm Warantied parts: All Recommended Components Motor size: 2306 ESCs: 30a Prop size: up to 5.5" LiPo: 4S-5S/1500mAh Includes Titanium: 2x Camera-cage brackets 2x Camera-cage anchors Hardware: 10x 4mm M3 iron bolts 14x 6mm M3 12.9 grade steel bolts 8x 8mm M3 12.9 grade steel bolts 10x 10mm M3 12.9 grade steel bolts 12x Sunknuts 4x 16mm M3 iron bolts 6x 2.5mm M2 cuphead iron bolts Aluminum: 1x 23mm front standoff 2x tail posts 2x camera savers Nylon: 4x 6mm M3 standoffs 4x nuts 2x M6 nylon washers Carbon Fiber: 1x 2mm Top (LiPo) plate 1x 1.5mm HD Cam plate 1x 4mm Main plate 2x Antenna mount plates (TBS and SMA) Other: 1x Lipo strap 1x LiPo foam pad 1x HD camera foam pad 4x Dog-bone landing pads 1x Antenna mount 1x SMA grommet 1x Build instructions Browse more Browse all Armattan Browse all 5" Frames Browse all Frame Kits
