Arrma 3/4s Servo Riser

Garage Life RC Verified independent store

→

Upgrade to our servo riser to allow you to use the Hot Racing, Treal or other servo savers. Our design leaves the servo mounted strongly to the servo mount and it rises the whole r adio box set and esc mount. We use a big footprint, and secure to the chassis, so the system has good contact and support with the chassis. Our system won't allow the servo to flex like other risers and you don't need to move the esc or switch. (You still can run the esc in the lower chassis mount with our mount) Riser Alone comes with the riser and 4 longer screws. Remove your receiver box, add our riser between the box and chassis and boom! (You may have to trim your servo saver arm and/or the receiver box for full movement. If this isn't in your wheelhouse, get our whole set and it is done for you!) Whole set includes a riser, servo saver, and an esc box precut for the servo arm. You don't need to cut the box or the servo saver with this setup. It is already done for you. *We design and test all our parts rigorously and do not release them without passing our tests. While we spend ample time and perform multiple tests, due to the nature of this hobby, things can break. 3D Prints are not always flawless, and you may see a blemish or two but will not impact the performance. When fastening 3D parts, please do not over tighten them. Please reach out of you have any troubles and we will get your squared away. Show more