The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House mixer, with the second isolated output being sent to a monitor or recording mixer. The direct output passes phantom power from the main mixer to the microphone for use with condenser microphones. The ProSplit includes a ground-lift switch on the isolated output to reduce noise due to ground loops between connected equipment. For versatility the ProSplit also features an attenuator pad switch on the input that can be used to alternately connect a preamplified (line-level) signal to the two microphone-level ProSplit outputs. Features 2-Way Splitter 1x XLR Microphone Input 1x Direct and 1x Transformer-Isolated XLR Outputs Direct Output Passes Phantom Power Switchable Ground Lift and Input Pad Passive Design - No Power Required Specifications Input Impedance > 1.1 kΩ @ 1 kHzTypical Driving Source Impedance is 150Ω Output Impedance < 255Ω @ 1 kHz1 kΩ Typical Output Load Impedance Frequency Response 20 Hz - 20 kHz (+/- 0.25 dB @ -15 dBu) THD < 0.26% (20 Hz - 20 kHz, -15 dBu Input)< 0.1% (45 Hz - 20 kHz, -15 dBu Input)0.002% Typical @ 1 kHz (-15 dBu Input) CMRR > 105 dB @ 60 Hz> 80 dB @ 3 kHz Phase Shift
