Light Weight ASA The Eryone ASA lightweight filament is a high-performance 3D printing material that combines high toughness, impact resistance, and ultra-lightweight, low-density characteristics, making it particularly suitable for applications such as aircraft models and outdoor models that demand high strength and low weight. Its excellent water resistance and UV protection ensure long-term stability in outdoor environments, avoiding the common issues of brittleness and degradation seen in PLA materials. The printed surface features a fine matte finish with minimal stringing and easy post-processing. With a heat deflection temperature of approximately 80°C, it maintains structural stability at higher temperatures, making it an ideal choice that surpasses PLA lightweight materials. Part I:Suggests Printing Parameters Parameter Set up Nozzle temperature 200-280 ℃ Bed temperature 80-100℃ Bed materia glass, PEI, spring steel plate Bottom printing temperature 220-280 ℃ Sealed printing Supports open printing; better results with enclosure. Printing speed 30-100mm/s Drying conditions 80-90℃, 10h Part II: Physical Properties of Materials Property Testing Method Unit Typical Value Density(g/cm³ at 21.5 ° C） ASTM D792 (ISO 1183, GB/T 1033) g/cm³ 0.99 Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ 75 Heat distortion temperature(° C) ASTM D648 1.8MPa 0.45MPa ℃ 72 Glass transition temperature (° C) DSC, 10 ° C/min ℃ 64 Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min 36 Part III: Mechanical Properties of Printed Samples Property Test conditions Test standards unit Typical Value Tensile strength X-Y 50mm/min GB/T 1040.4 MPa 16.1 Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa 972.4 Elongation at break X-Y 50mm/min GB/T 1040.4 MPa 8.1 Tensile strength X-Z 50mm/min GB/T 1843 MPa 8.3 Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa 758.3 Elongation at break X-Z 50mm/min GB/T 1040.4 % 7.5 Bending strength 2mm/min GB/T 9341 MPa 27.5 Bending modulus 2mm/min GB/T 9341 MPa 1389.6 Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 4.1 Note: All splines are printed under the following conditions: printing temperature=250 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm
Related
Related
Related