Build your own DIY guitar with an ash body, maple neck and fretboard, and trapezoid abalone fretboard inlays kit. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (5/10) Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right Ash has open grain that needs filling before finishing for a smooth result Adjustable bridge sets intonation quickly once the posts are seated Body Material: Ash (2-3 pcs) Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Maple Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628mm / 24.75″ Binding: None Fretboard Material: Maple Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: None Nut: White Plastic Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 1V, 1T, 3-Way Toggle Wiring: DIY (soldering required) Wiring Diagram: HH, 1 Volume, 1 Tone, 3-Way Switch Output Jack: Side jack Hardware Bridge: Adjustable Bridge + Stopbar Tuners: Closed Pickguard: White Knobs: Chrome Cavity Covers: White Strings: Steel Finish: Chrome What's in the Box Unfinished guitar body Unfinished neck with light fretboard and shell-look block inlays 6x chrome sealed tuners with bushings and washers String set 2x chrome-covered humbucker pickups in mounting rings Pre-wired harness with potentiometers, wiring, nuts and washers Chrome stop tailpiece Chrome bridge with individual saddles 4x chrome bridge and tailpiece posts Chrome output jack plate with jack Black neck plate with neck bolts Black tapered plastic cover plate 2x chrome dome control knobs White pickguard White oval control-cavity cover plate Allen wrench Guitar cable with one right-angle plug Assorted screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
