Audio-Technica AT875R Short Shotgun Microphone Line + gradient microphone, 6.9" long With its smooth on-axis tone, great off-axis rejection, and straightforward operation, the Audio-Technica AT875R short shotgun microphone is well suited for budget-conscious indie films, TV shoots, nature recording, and documentary projects where simplicity and quality sound are prioritized. The AT875R's high sensitivity allows it to perform reliably with a variety of microphone preamp classes. Its full-spectrum frequency response utilizes a gentle increase in high frequencies to enhance intelligibility and compensate for loss in clarity resulting from wind protection. The durable housing ensures rugged dependability while maintaining a light weight that won't burden your boompole or camera, and the included accessories accommodate mounting the AT875R to a mic stand, boompole, or camera-mount microphone holder. Quality Sound Being less than 7" long, the AT875R is equally at home on a boompole or atop a camera. It uses an interference tube and a supercardioid polar pattern to yield focused on-axis directionality while attenuating rear-entry sound and rejecting sound at the sides. This makes the AT875R far more effective at capturing distant sources than the omnidirectional mics found in most cameras. Its 90 Hz to 20 kHz frequency response naturally reduces problematic bass frequencies from common sources such as traffic rumble and wind noise. 11 to 52 VDC Phantom Powered With a balanced 3-pin XLR output and support for 11 to 52 VDC phantom powering, the AT875R is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras. Ideal for Boompole Mounting The AT875R includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the AT875R in the Audio-Technica AT8415 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic. The AT875R also includes two rubber O-rings that expand the microphone's diameter to fit the larger mic holders found on many high-end cameras. Windscreen Minimizes Wind Noise The AT875R has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 12 cm Super-Softie, which also provides high immunity to rain.For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the separately available Rycote Windshield Kit 3, a complete windjammer, windshield, and shockmount suspension system. Audio-Technica AT875R Specs Microphone Form Factor Stand/Boom Mount Sound Field Mono Operating Principle Line Gradient Capsule 1 x Electret Condenser Polar Pattern Lobar, Supercardioid Orientation End Address Circuitry Solid-State Pad None High-Pass Filter None Tone Adjustment None Indicators None On-Board Controls None Windscreen Foam (Included) Performance Frequency Range 90 Hz to 20 kHz Maximum SPL 127 dB SPL (1 kHz, 1% THD) Off-Axis Rejection 5 dB at 60°>25 dB at 120°>20 dB at 180° Impedance 100 Ohms Sensitivity -30 dBV/Pa Dynamic Range 107 dB (Typical, 1 kHz, at Max SPL) Signal-to-Noise Ratio 74 dB (1 kHz, at 1 Pa/94 dB SPL) Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic) Power Operating Voltage 11 to 52 V (Phantom Power) Operating Current Consumption 2 mA Physical Color Black Mounting 3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware) Certifications RoHS, as per Manufacturer Dimensions ø: 0.83 x L: 6.89" / ø: 21 x L: 175 mm Weight 2.8 oz / 79 g Packaging Info Package Weight 0.825 lb Box Dimensions (LxWxH) 9.55 x 5.2 x 2.85"
Related
Related
Related
Related