This is a REPLACEMENT Ferco 528 Lock - Read all Info, locks have changedUsed in an Atrium door to replace the Old- Style Ferco Lock, which was discontinuedThis lock fits the standard door - up to 81 inches tallIf your door is taller, you will need an extension 40325 - Extension Length: 19-5/8 inches (500mm)Lock Type: Ferco 4 point lock - 2 Roller with 2 ShootboltsOverall Length: 76-7/16 Long - Original atrium doorBackset: 1-1/8 (28mm) from edge of faceplate, to center of handleLock case: 7-3/4 x 1-3/4Spindle Size: 1/4 x 4-5/8 inch (7mm Square)Ferco Face plate: 5/8 inch (16mm) wide, has G15371.19 stamped midway from bottom of door to lock (528 ID's the faceplate & backset)Handle Spacing: 2-3/4 (70mm) from center of thumb turn to Center of handle.Handle Height: 35 inchesBottom Roller Position: 11 inches unlocked, 11-5/8 LockedTop Roller Position: 16-1/2 inches unlocked, 17-1/8 Locked(Roller moves 5/8 inch between being locked or unlocked)Measurements are from center of handle to center of rollerNEW ATRIUM / FERCO REPLACEMENT REQUIRES MODIFICATION:You will need to cut the main lock for height, as needed before attaching shootbolt extensions.The new lock comes with a 1/4 inch (7mm) spindle ( yours is 5/16 (8mm) and a Brass SleeveYou may need to cut the new spindle to length and cut the brass sleeve in half to retrofit your old handles.If you need the new sleeve and spindle - install handles and remove set screw - drill into brass sleeve and into spindle, reinstall set screw - this will secure handles1. Rods Need to be cut to length.2. New 7mm spindle to retrofit existing handles with 8mm hole.3. The roller cams DO NOT align with existing strikes, they must be relocated.Roller cams from center of cam to top of spring latch: 14 inches from top 12.5 inches from bottomNote:To remove rollers grind rivet on back side flush with bar, Install lock and then break off roller.If the roller is removed first the parts flop around.4. The spring latch is handed, and can be reversed.5. NO Deadbolt, Spring Latch onlyInstallation Note:Detailed instructions available on Website - See Article: How to Replace the Multipoint Lock in a Wooden Atrium DoorRELATED Atrium / FERCO 528 Parts & Hardware:40027- Handleset to be used with this lock40325 - Ferco 19-5/8 inch (500mm) Extension for doors greater than 81 inches tallE-91440-00-0-0 - Reducing sleeve only; 7mm - 8mm9-26874-56-0-1 - 7mm/118mm (1/4" x 4-5/8") Square SpindleArticle:How to Rehand a Ferco 528 Lock in Atrium DoorsGeneral Information on Atrium Doors: Guide to Atrium Doors
Related
Related
Related
Related