Product OverviewThe Audio-Technica BPCB1 is a replacement cable designed for the BPHS1 broadcast headset. The 3.3 m (10.8 ft) cable terminates in two separate output connectors, one for the microphone and one for the headphone. The microphone output uses a 3-pin XLRM-type connector, while the headphone output uses a 3-conductor 1/4" connector. It is a direct replacement for a damaged or worn original BPHS1 cable.Product DescriptionBroadcast and intercom headsets see heavy daily handling, and the cable is usually the first component to fail under repeated flexing and connector strain. The BPCB1 restores a BPHS1 broadcast headset to full service without the cost of replacing the headset itself. Its split termination routes the boom microphone signal through a 3-pin XLRM connector and the headphone feed through a 3-conductor 1/4" connector, matching standard broadcast and intercom panel inputs. The 3.3 m length gives a commentator or camera operator room to move at a sideline position, press table, or studio desk. Keeping a tested spare cable in the kit bag minimizes downtime during live sports, news, and event coverage. The connector configuration matches the original BPHS1 wiring, so installation requires no adapters. You can review related broadcast headset accessories at Creation Networks. The BPCB1 is intended specifically for the BPHS1 and is not interchangeable with the four-pin BPHS1-XF4 variant.Key Features Dual Termination — The cable splits into separate microphone and headphone output connectors for broadcast panel inputs. XLRM Microphone Output — The boom microphone signal routes through a 3-pin XLRM-type connector. Quarter-Inch Headphone Output — The headphone feed uses a 3-conductor 1/4" connector. 3.3 m Length — The 3.3 m (10.8 ft) cable gives commentators and operators freedom of movement at the position. BPHS1 Compatibility — The cable is a direct replacement for the original BPHS1 broadcast headset cable. Technical Specifications Type Replacement headset cable Cable Length 3.3 m (10.8 ft) Microphone Connector 3-pin XLRM-type Headphone Connector 3-conductor 1/4" Compatibility BPHS1 broadcast headset Specifications sourced from Audio-Technica (audio-technica.com).
Related
Related
Related
Related