If you want build a digital Bluetooth amplifier board, AudioB I2S Bluetooth audio receiver module can be a good choice for your project. This is a Bluetooth 4.2 stereo receiver module with I2S digital output and music re-sampling frequency is 48KHz. It is Apt-X supported. It is based on CSRA64215. We have used breakout pins to 2x10 2mm space male pins. You can integrate it to your project easily. This module has a U.FL connector. You can connect an external 2.4G antenna with it by using a U.FL to SMA cable. If you want a demo board, please buy our TSA7010 Digital Bluetooth Audio Receiver. It's a AudioB I2S module + DAC board. The module PINs 7,8,9,10 are I2S output pins: 7 - GND 8 - BCK I2S synchronous data clock, It's a 2.304MHz square wave signal. 9 - SD I2S synchronous data output. 10 - LRCK I2S word select, 48KHz. 1 - Left channel data, 0 - Right channel data. Setting switch: We set to I2S in normal state. Set to SPI when you need to program the module. Note: You need set the on board switch to SPI when you are programming the module. Note: Quick press S2 to switch to the previous song, long press to reduce the volume. Quick press S3 to switch to the next song, long press to increase the volume. Press S1 to play or pause. If there is audio output, MUTE pin will be high level, otherwise, will be low level. Features: Bluetooth 4.2 I2S digital output Sampling Rate: 48KHz Bit per Sample: 16 bit Left Justified Justified Data 1 bit delay Apt-X supported Low power consumption: 5mA@5V HFP V1.6 HSP V1.2 A2DP V1.2 AVRCP v1.4 Support for smartphone application(APPs) Documents: How to change the BT name Bluesuite2.5.0 Dimensions Firmware(I2S)
Related
Related
Related
Related