Audiolab DC Block Direct Current Blocker
Audiolab DC Block Direct Current Blocker at Vinyl Sound Toronto Canada The DC Block is a single-component mains power optimisation device from Audiolab (Cambridge, United Kingdom), available at Vinyl Sound in Toronto, Canada. A compact, inline solution to two of the most pervasive power quality problems in home audio, the DC Block combines a DC offset blocker that corrects the asymmetrical AC mains waveform with a high-performance audio-class RFI/EMI filter that removes both differential-mode and common-mode noise from the supply reaching a single connected component. Simply plugged between a wall socket and the IEC power input of any audio or AV component, it corrects DC contamination that saturates toroidal transformers, eliminates mechanical hum, and lowers the noise floor — with audible results including reduced grain, improved clarity, better-defined bass, and more open treble. Rated at 600VA peak load and compatible with amplifiers up to 2 x 150W stereo or 1 x 300W mono, the DC Block is universally compatible with 100-240V mains supplies and supplied complete with both input and output cables for immediate use. DC on the Mains: The Problem and the Solution The mains supply in a typical home should deliver pure AC — a perfectly symmetrical sine wave alternating between positive and negative phases at equal amplitude. In practice, the proliferation of asymmetrical electrical loads in the modern home — dimmer switches, variable-speed kitchen appliances, LED drivers, and computer switch-mode power supplies — biases the AC waveform so that the positive and negative half-cycles are no longer equal, introducing a DC voltage component into the supply. Toroidal transformers of the type used in virtually all high-quality audio amplifiers, including every Audiolab integrated and power amplifier, are acutely sensitive to this contamination. Even less than 500mV of DC voltage — entirely typical in an average household supply — is sufficient to partially saturate the transformer core. Saturation causes the transformer to draw more current than normal, reduces its efficiency, introduces noise into the audio signal, and in many cases produces the audible low-frequency mechanical vibration that audiophiles recognise as transformer hum. The Audiolab DC Block intercepts this problem before it reaches the amplifier: its DC blocking and cancellation circuit corrects the offset and rebalances the sine wave, allowing the toroidal transformer to operate symmetrically as designed. Dual-Action RFI/EMI Filtration and Sonic Benefits Beyond DC correction, the DC Block contains a high-performance audio-class filter circuit that addresses the full spectrum of mains contamination present in a modern domestic environment. Differential-mode noise — generated between the live and neutral conductors by the cheap switch-mode power supplies used in phone chargers, televisions, LED lighting, and computing equipment sharing the same ring main — is suppressed within the filter stage. Common-mode noise — introduced to both conductors by airborne electromagnetic interference from Wi-Fi routers, Bluetooth devices, and mobile phones in the home — is addressed simultaneously. Together, these two filtration modes reduce the noise floor of whatever component the DC Block feeds. Audiolab describes the audible result as reduced grain, improved clarity, better-defined and more controlled bass, and a more open, airier treble presentation — improvements that compound progressively as additional DC Block units are added to other components in the system. Audiolab recommends prioritising the integrated amplifier or power amplifier as the first unit to treat, as the toroidal transformer in the amplifier is the component most directly harmed by DC contamination and most immediately improved by its removal. Key Features DC Offset Blocking and Cancellation: Corrects DC voltage contamination on the AC mains supply that saturates toroidal transformers in audio amplifiers, causing degraded sonic performance and audible mechanical vibration. High-Performance Audio-Class RFI/EMI Filter: Dual-action filtration suppresses differential-mode noise from switch-mode power supplies and common-mode noise from Wi-Fi, Bluetooth, and mobile phone interference sharing the same mains supply. 600VA Peak Load Rating: Compatible with amplifiers up to 2 x 150W stereo or 1 x 300W mono, covering the full Audiolab integrated and power amplifier range including the 9000A and 9000P. Single-Component Inline Design: Plugs directly between a wall socket and the IEC power input of one audio or AV component — no rack space, no multiple outlet distribution, no complex installation required. Audible Noise Floor Reduction: By correcting DC offset and removing RFI/EMI contamination, the DC Block lowers the system noise floor with results described as reduced grain, improved clarity, better-defined bass, and more open treble. Scalable System Treatment: Multiple DC Block units can be used simultaneously across different components in a system — preamplifier, DAC, CD transport, streamer — with each additional unit delivering incremental improvements in overall system performance. Universal Voltage Compatibility: Rated for 100-240V at 50/60Hz, fully compatible with Canadian 120V/60Hz and US mains standards without modification. Compact Inline Form Factor: At 113 x 59 x 140mm and 0.7kg, the DC Block fits discreetly behind any component in a rack or shelf system without occupying shelf space of its own. Both Cables Supplied: Mains input cable and IEC output cable are included in the box for immediate out-of-box installation. Compatible with All Audio and AV Components: Suitable for use with amplifiers, preamplifiers, integrated amplifiers, CD players, DACs, streamers, and AV processors — any component with an IEC mains input. Technical Specifications General Description Mains Filter and Direct Current Blocker (single component) DC Blocking Yes — corrects DC offset on AC mains supply RFI/EMI Filtration Yes — differential-mode and common-mode noise suppression Peak Load Rating 600VA Amplifier Compatibility Up to 2 x 150W stereo or 1 x 300W mono Power Requirements 100-240V, 50/60Hz (universal) Dimensions (W x H x D) 113 x 59 x 140mm Net Weight 0.7kg Connections at a Glance Input: Mains cable to wall socket (supplied) Output: IEC cable to component mains input (supplied) Installation: Inline between wall socket and component — no rack mounting required What's in the Box Audiolab DC Block Direct Current Blocker Mains input cable IEC output cable User Manual Frequently Asked Questions What is the Audiolab DC Block? The Audiolab DC Block is a compact inline mains power optimisation device that combines DC offset blocking with high-performance audio-class RFI/EMI filtration for a single connected audio or AV component. It corrects DC voltage contamination on the household AC supply that saturates toroidal transformers in amplifiers, causing degraded performance and mechanical hum, while simultaneously suppressing differential-mode and common-mode noise from modern domestic interference sources. It is rated at 600VA peak load and compatible with amplifiers up to 2 x 150W stereo or 1 x 300W mono. What is the difference between the Audiolab DC Block and the DC Block 6? The Audiolab DC Block is a single-component inline device that treats one audio or AV component at a time, plugging directly between a wall socket and the IEC input of that component. The DC Block 6 is a six-outlet rack-format unit that treats up to six components simultaneously from a single mains connection, adding overload protection and a front-panel OLED voltmeter display. Audiolab recommends starting with the DC Block on the amplifier for the greatest single-component benefit, then expanding with additional DC Block units or upgrading to the DC Block 6 to treat a complete system. Which component in my system should the DC Block be connected to first? Audiolab recommends using the DC Block with the integrated amplifier or power amplifier as the first priority. The toroidal transformer in an amplifier is the component most directly affected by DC contamination on the mains — it is most susceptible to saturation, most likely to produce audible mechanical hum, and most immediately improved by DC correction. Source components, preamplifiers, and DACs can benefit from additional DC Block units, with each further unit delivering incremental improvements to the overall system noise floor. Will the Audiolab DC Block work with a high-power amplifier like the 9000A or 9000P? Yes. The DC Block is rated at 600VA peak load and is compatible with amplifiers up to 2 x 150W stereo or 1 x 300W mono. The Audiolab 9000A delivers 100W per channel into 8 ohms and the 9000P delivers 100W per channel stereo or 300W bridged mono — both fall within the DC Block's compatibility rating under normal listening conditions, where programme material rarely sustains peak power for extended periods. Does the Audiolab DC Block work with Canadian mains voltage? Yes. The DC Block is rated for 100-240V at 50/60Hz and is fully compatible with the 120V/60Hz mains standard used in Canada and the United States. No voltage conversion, adapter, or modification is required for use in Toronto, Canada or anywhere in North America. Can I use multiple DC Block units across my entire system? Yes, and Audiolab specifically recommends this approach for maximum benefit. Each additional DC Block unit added to a preamplifier, DAC, CD transport, or streamer delivers incremental improvements to the overall system noise floor beyond the primary benefit gained at the amplifier. For listeners who want to treat a full six-component system simultaneously from a single mains connection, the Audiolab DC Block 6 offers equivalent dual-action DC blocking and RFI/EMI filtration across six outlets in a rack-format chassis. Where can I buy the Audiolab DC Block in Toronto, Canada? The Audiolab DC Block is available at Vinyl Sound in Toronto, Canada. Vinyl Sound is an authorized Audiolab dealer serving audiophiles across the Greater Toronto Area and Canada. Shop online at vinylsound.ca or visit the showroom to discuss mains power treatment as part of a complete Audiolab system build.
