Solid Perfect-Surface Copper+ (PSC+) ConductorsSolid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. Carbon Mesh-Network Noise-DissipationIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. Direction-Controlled ConductorsAll drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance. A fundamental aspect of AudioQuest's multifaceted Noise-Dissipation technology, Direction-Controlled Conductors ensure induced noise is dissipated and drained properly. Double-Balanced GeometrySpecifically designed for single-ended applications, Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. Hard-Cell Foam InsulationHard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion. Cold-Welded, Hanging-Silver Directly Over Pure Purple Copper Terminations Solid Perfect-Surface Copper+ (PSC+) Conductors: Solid conductors prevent electrical and magnetic strand-interaction. Solid PSC+ Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. The result is clearer, cleaner, more naturally beautiful sound. Hard-Cell Foam Insulation: Hard-cell foam insulation is nitrogen-injected to create air pockets. Because nitrogen (like air) neither absorbs nor releases energy from or into the conductor, it causes much less of the out-of-focus effect common to other materials, thereby reducing distortion. Carbon Mesh-Network: AudioQuest’s Noise-Dissipation technology significantly reduces the RF Noise that reaches active circuits and causes masking effects. Double-Balanced Geometry: Specifically designed for single-ended applications, Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. Cold-Welded Hanging-Silver over Pure Purple Copper Terminations: Cold-welding bonds the plug to the wire using high pressure, preserving the character of the wire at the point of termination. Hanging-Silver directly over high-purity Purple Copper further ensures uncompromised signal transfer. Enhanced Audio Experience: Mackenzie RCA > RCA delivers high-quality sound for a superior entertainment experience. Clear Signal Transmission: Minimizes interference and reduces distortion to deliver clean, clear, naturally beautiful sound. High-Quality Materials and Design: High-purity conductor metal, carefully selected insulation, and sophisticated shielding ensure minimal distortion. Versatile Connectivity: Ideal for connecting TVs, soundbars, turntables, AV receivers, and more. Durable and Reliable Design: Built to withstand everyday use, ensuring consistent performance.
