Enjoy the Improved Audio Performance Of the latest Generation Audison D-Class Technology! 12-Channel Amplifier With DSP - 1080W (AF M12.14) The AF M12.14 bit is an amplifier with integrated DSP, equipped with 12 high-power amplified channels settable in bridge mode and 2 pre-amplified outputs, to reach a total of 14 output channels. It features 8 analogue inputs of PRE IN type (Lo-Level), 8 analogue inputs of SPEAKER IN type (Hi-Level) and 1 S/PDIF digital optical input. Through accessory modules it is possible to increase the number of inputs: F4IN– adds 4 analogue SPEAKER IN input channels F2O– adds 2 digital inputs: digital optical S/PDIF or digital electrical S/PDIF, selectable by a dedicated switch on the module Equipped with a high-performance 32-bit digital signal processor (DSP) clocked at 147 MHz and 24-bit AD and DA converters, it allows to maximize the acoustic performances of your Car Audio system. Each Output Channel Features: Adjustable Graphic/Parametric equalizer with 15 poles Electronic crossover adjustable in 1Hz steps, with Butterworth / Linkwitz / Bessel / Chebyshev / QLP filters and slopes from 6 to 48 dB Digital control of time delays Each Input Channel Features: Adjustable Parametric equalizer with 12 poles Digital control of time delays Features: Enjoy the improved audio performance of the latest generation Audison D-Class technology Maximum versatility thanks to the bridging option for each pair of channels Two independent power supplies: the audio amplifier power supply is loosely regulated, the DSP power supply is stiffly regulated Native DSP working at 24 bit/96 kHz and an extended audio band up to 40 kHz Pure digital signal transfer with a resolution up to 24bit/96 kHz Quick I/O Configuration speeds up system definition and signal routing When connected with Audison B-CON hi-res Bluetooth receiver, this feature manages the Master Volume of the Forza amp thus ensuring full dynamic range signal at the input iDatalink Maestro AR native support for a total integration with OEM infotainment Equipped with eight analogue inputs, to support total connectivity even with the most complex OEM systems Electrical Signal Analysis ensures proper integration and correction for each input channel Automatically sums and reverses OEM equalization Input delay compensation of time-delayed factory outputs prior to signal summing Allows left and right inputs to match in phase before tuning, even if OEM phase processing has been used Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source Next-generation bit Drive software platform - developed for this family of products - simplifies every control and function 14 DSP-processed output channels for a total control The acoustic analysis integrates the response graph into the equalizer display ensuring efficient tuning and great sound, compatible with any 24-bit USB microphone The electrical analysis integrates the response graph into the input equalizer display, ensuring efficient tuning Power Supply: Nominal power supply voltage / fuse: 11 - 15 VDC / 2 x 30A Pulse operating voltage: 6.5 - 17.5 VDC Idling current: 1.68 A Standby current draw: 1.7 mA Consumption at 14.4 VDC, Minimum load impedance (Max Musical Power): 45 A Remote IN: 4 -15 VDC (1 mA) Remote OUT: 6.5 -15 VDC (150 mA) ART - Automatic Remote Turn on/off from Speaker-In: 1.5 VDC Efficiency at rated power (RMS) at14.4 VDC, 1percent THD,4 OHM, All Channels: 80 Percent Amplifier Stage: Distortion - THD+N at 1 KHz, 4OHM, 70percent Rated Power: 0.03 Percent Damping factor at 1 kHz, 4OHM, 2 VRMS: 80 Bandwidth at -3 dB: 10 Hz - 42 kHz S/N ratio (A weighted at 1 V Input, Rated Power) Master Input: 98 dBA S/N ratio (A weighted at Rated Power) Optical Input: 105 dBA Minimum load impedance: 12Ch: 2OHM 6Ch - (Bridge 1/2: 3/4: 5/6: 7/8: 9/10: 11/12): 4OHM Output Continuous Power (RMS) at14.4 VDC, 1percent THD: 12 Ch at 4OHM: 60 W x 12 12 Ch at 2OHM: 90 W x 12 4Ch (Bridge 1/2: 3/4: 5/6: 7/8: 9/10: 11/12) at 4OHM: 180 W x 6 Cea Specifications: Output power at 4OHM, 1percent THD+N, 14.4 V: 45 W SN ratio (ref. 1 W output): 75.5 dB Inputs / Outputs: Pre-In (8 Ch): 0.6 - 6 VRMS (15 kOHM Imp.) Speaker-In (8 Ch + additional 4 Ch with optional F4IN card): 2.2 - 22 VRMS (5 OHM Imp.) Digital IN: 1 x Optical S/PDIF: Max 192 kHz / 24 bit + 1 x Optical/Coaxial S/PDIF with optional F2O card DSP Preout (2 Ch): 5V RMS Digital Signal Processor: Audio DSP and converters: Analog Devices ADAU1467 automotive qualified audio processor. Processing at 96 kHz.Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance Filter type: Full / High-Pass / Low-Pass / Band-Pass Filter mode and slope: Linkwitz-Riley at 12/24/36/48 dB/Oct. Butterworth at 6/12/18/24/30/36/42/48 dB/Oct. Bessel at 6/12/18/24/30/36/42/48 dB/Oct. Chebyshev at 6/12/18/24/30/36/42/48 dB/Oct. QLP at 6 dB/Oct. Crossover frequency: 20 Hz - 20 kHz Phase control: 0 / 180, All-Pass filters Analog Input Equalizer (20 Hz - 20 kHz): 12 Biquad + Delay Output Equalizer: Parametric/Graphic Biquad: 15 poles, 20 Hz - 20 kHz Input and Output Real Time Audio Monitor: RTA Time Alignment Distance: 0 - 510 cm / 0 - 200.8 inches Time Alignment Delay: 0 - 15 ms Control Connections: Audison DRCC port: Input for DRCC remote control (Optional) Audison ADC port: Manage other Audison devices that support this standard Control 1 wire: Customizable functions (+ 12 V activated) Control 2 wire: Customizable functions (+ 12 V activated) General Requirements: PC connections: Micro USB 1.1 / 2.0 / 3.0 Compatible Software/ PC requirements: Windows 10, Windows 11 (min. res. 1024 x 768) Ambient operating temperature range: 0 C to 55 C Size / Weight: Max size W x H x D (mm): 240 x 47 x 156 Weight (kg): 2.04
