Audison APS10S4S Prima Line Series 10" 800W Shallow Subwoofer (APS 10 S4S)

Frankies Auto Electrics Verified independent store

→

Delivers Maximum Performance in a Sealed Enclosure With Ultra-Compact Volumes! Prima Series 10" Shallow Subwoofer The APS 10 S4S (Order Code APS10S4S) is designed to deliver maximu m performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice - coil and single voice-coil versions feature push connectors for ease of wiring and configuration. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However, reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dust cap-basket geometry which guarantees large excursion of the mobile group while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the "rocking - -mode" phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom - plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Features: Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility. Designed to deliver maximum performance in a sealed enclosure starting from 10 lt. Specially designed cone-dust cap-basket geometry guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to a minimum. Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to the rear wall of the enclosure. Massive motor assembly, optimized with FEM (Finite Element Modelling) for perfect control under high power, high excursion conditions. Water-repellent pressed paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer. Single Voice Coil design specifically developed to be combined with either AP8.9 bit (2 CH bridged), APF8.9bit (2 CH Bridged) Steel mesh grille and plastic gasket included. Specifications: Component: Subwoofer Size: 250mm (10") Power Handling - Peak: 800W Power Handling - Continuous: 400W Impedance: 4-Ohm Centre ~ Centre Distance: 255mm (10.04") Magnet Size: (D) 140mm x (D) 70mm x (H) 30mm (5.51" x 2.76" x 1.18") Total Driver Displacement: 1.12 Magnet - High-Density Flux Ferrite Cone: Water-Repellent Pressed Paper Subwoofer Voice Coil: 60mm (2.36") Xmech: +/-18 (0.71) Mounting Cut-Out: 233mm Mounting Depth: 88mm Weight: 5.24kg Show more