autoLYNX 8.0" Jeep Sway Bar Disconnect

HighLift Off-Road Verified independent store

→

Has it been too many years of suffering the sway bar “quick disconnect?" Most experiences require using a hammer and a tire wrench. It’s arguable that unbolting is easier. The pate nted autoLYNX completely eliminate the hassle of disconnecting and reconnecting your sway-bar with a simple twist of a knob. This allows to spend more time doing what you love and less time fighting with your Jeep. FITS: 2007-2024 JEEP WRANGLER and 2020-2024 JEEP GLADIATOR Fitment Notes: - If you have a 1"-2.5" lift installed with stock shocks with or without shock extension brackets and you don't have bump stop extensions installed you will need to run the 8" version (shock stroke length should not exceed 9.5"). - 1.5"-2.5" lift - If you do have at least 2" bump stop extension installed with longer travel shocks you can use the 10.5" version. - 3" lift and up use 10.5 (must have at least 2" bump stop extensions installed). 2018-2023 Sahara, Sport, and Willys models please refer to the fitment guide before purchasing: CLICK HERE Hardware Specs: - Top stud nut - M12x1.25 - Washers - M12 or 1/2" - Lower mounting bolt - M12x1.5 - 70MM long Show more