PROTECTS UNDER EXTREME CONDITIONS Autotriz Wheel & Caliper is an extremely durable coating for any type of wheels and calipers. Its main advantage is its resistance to wheel cleaners with a pH ranging between 1 and 11. Its superb self-cleaning abilities help repel road grime, brake dust from brake pads and impregnation of iron particles from the brake discs, thus highly reduces cleaning effort. Instructions For Use Clean the surface thoroughly to be free of tar, iron particles, etc. on the surface.Use the white microfiber suede cloth that comes with the box or use the applicator of your preference. Foam applicators can also be used as a substituteApply AUTOTRIZ Wheel & Calliper Coating using normal pressure on the applicator.Make sure the area is well covered. Wait a minute and let the coating cureRemove residue (not always necessary, depends on the surface) If you are working on a shiny or black-colored surface make sure you don’t have any high spots or streaks when you are done.Wait 60 minutes before adding a layer for maximum protection.Allow curing of coating to begin. Curing can be accelerated using IR Lamps. Follow the lamp manufacturer's recommended settings.Keep coating away from all polish and compound dust during the curing process. TOOLS Depending on the substrate Wheel Coating can be applied with microfiber applicators. The product is also suitable for spray application. Spray application: Process: HVLP-compressed air Spray gun: e.g. SATA minijet HVLP Working pressure: ca. 2 – 3 bar Nozzles: 0.8 – 1.3 mm The spray gun can be cleaned with n-butyl acetate, for example. TECHNICAL DATA Appearance: Colourless Density: ca. 0,76 g/cm3 Base: Polysiloxane Curing: Normal ambient temperature/ 80°C Shelf Life: 12 months
