NDAA Compliant • Network Cabinet SpeakerAXIS C1004-E — Australian Stock & 5-Year Warranty The AXIS C1004-E Network Cabinet Speaker is a complete all-in-one IP audio system for clear voice announcements and background music. A single network cable carries both PoE power and audio, while a built-in 6 W Class D amplifier, pre-configured DSP and microphone make it ready to use straight out of the box. Rated IP45 / NEMA 3R for indoor and sheltered outdoor mounting, it is NDAA (Section 889) and TAA compliant for government, education and enterprise sites. Max SPL 96 dB Driver 12 cm + Dome Tweeter Amplifier 6 W Class D Power PoE (single cable) Smart, Simple Network Audio The C1004-E packs a speaker, amplifier, audio processor and microphone into one network endpoint. Connect it to your IP network and it integrates with network video, access control, analytics and VoIP (SIP) systems, so a single cable delivers announcements, alerts and music without a separate audio server. All-In-One IP Audio Built-in 6 W Class D amplifier, DSP and microphone in one PoE-powered unit — no external amplifier or mixer needed. Indoor & Sheltered Outdoor IP45 / NEMA 3R rated plastic-and-metal casing lets it mount horizontally or vertically, indoors or on a sheltered building exterior. Open Integration SIP support for VoIP and intercom systems plus the VAPIX API for tight integration with Axis video, access control and analytics. NDAA & TAA Compliant Built to meet U.S. NDAA Section 889 and TAA requirements for compliance-sensitive government and critical-infrastructure projects. Technical Specifications Audio Enclosure Two-way, bass-reflex type Drivers 12 cm (4.72") dynamic cone speaker + 2.5 cm (0.98") balanced dome tweeter Max sound pressure level 96 dB SPL Frequency response 60 Hz – 20 kHz Coverage angle 130° horizontal × 100° vertical Amplifier Built-in 6 W Class D Microphone Built-in (can be disabled), 50 Hz – 16 kHz Signal processing Built-in, pre-configured DSP Network & Power Network RJ45 Ethernet connector with PoE Power Power over Ethernet (single cable for power and connectivity) Protocols / API SIP, VAPIX® Application Programming Interface Integration Network video, access control, analytics, VoIP Compliance NDAA Section 889, TAA General Casing Plastic and metal Environmental rating IP45 / NEMA 3R Mounting Horizontal or vertical; indoor or sheltered exterior Operating temperature -20 °C to 50 °C Downloads AXIS C1004-E DatasheetAxis Network Speaker Installation GuideAxis Network Speaker User Manual Frequently Asked Questions Is the AXIS C1004-E NDAA compliant?Yes. The C1004-E is built to meet U.S. NDAA Section 889 and TAA requirements, suitable for government and compliance-sensitive deployments. How is the speaker powered?It is powered over the network via PoE, so a single Ethernet cable provides both power and audio connectivity. Does it need a separate amplifier?No. The C1004-E has a built-in 6 W Class D amplifier, DSP and microphone, so it works as a complete audio endpoint on its own. How loud is it?The speaker delivers a maximum sound pressure level of 96 dB with a 60 Hz – 20 kHz frequency response. Can it be installed outdoors?Yes. With an IP45 / NEMA 3R rating it can be installed indoors or on a sheltered exterior of a building, mounted horizontally or vertically. Does it support SIP / VoIP?Yes. The C1004-E supports SIP for integration with VoIP phone systems and intercoms, plus the VAPIX API for third-party integration. What can it integrate with?It integrates with network video, access control, analytics and VoIP systems for automated announcements and alerts. What is the operating temperature range?The C1004-E operates from -20 °C to 50 °C, suitable for most indoor and sheltered outdoor environments. What warranty applies in Australia?This unit is backed by a 5-year Australian warranty, with local tech support and fast AU-wide shipping from CCTV Guru. 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support
