NDAA Compliant • 90W PoE MidspanAXIS TU8003 90 W Connectivity Midspan — Australian Stock & 5-Year Warranty The AXIS TU8003 90 W Connectivity Midspan delivers up to 90 W of IEEE 802.3bt Type 4 power over a single Ethernet run, making it the purpose-built power source for Axis PTZ cameras, heated outdoor domes and high-draw panoramic units. Its portcast technology uses the camera’s own IP address to present audio and I/O connectivity as though they were built into the camera — so audio and video arrive in one stream with no extra VMS licence. An SFP slot lets the same unit terminate a fibre backhaul, and the configurable I/O ports allow remote on/off power control at the edge. POE OUTPUT 90 W max, 54 V DC STANDARD IEEE 802.3bt Type 4 FIBRE READY SFP slot (1 Gbit) AUDIO & I/O Two-way audio + 4 inputs One midspan, three jobs Most installs need a power source, an audio interface and an I/O board. The TU8003 collapses all three into a single DIN-rail or wall-mounted unit sitting in the comms room, which keeps the camera end clean and removes the need for separate encoders or relay modules at the pole. Portcast audio & I/O Audio and I/O connect through the camera’s IP address, so two-way full-duplex audio rides the existing video stream. No second device to license in your VMS. 90 W for demanding PTZ IEEE 802.3bt Type 4 plus AXIS High PoE supplies 54 V DC at up to 90 W — enough headroom for heated outdoor PTZ domes and wiper-equipped units. Copper or fibre A 1 Gbit SFP slot accepts Axis LC.LX, LC.SX or 1000BASE-T modules, so a single midspan serves both standard Cat6 runs and long fibre hauls. Remote power control External power control via the I/O interface lets you cut and restore camera power remotely — a genuine fix for a frozen device at the top of a mast. Technical Specifications POWER PoE standard IEEE 802.3bt Type 4, plus AXIS High PoE Maximum output High Power over Ethernet, max 90 W Output voltage 54 V DC (max 90 W) AC input voltage 100 to 240 V AC AC frequency 50–60 Hz Max AC power consumption 118 VA Detection Automatically detects PoE and High PoE devices and supplies inline power NETWORK & CONNECTORS Data rate 10/100/1000 Mbps Network Shielded RJ45, EIA 568A and 568B Fibre SFP slot (1 Gbit only) Power connector C14 I/O connector 6-pin 2.5 mm terminal block Audio connector 4-pin 2.5 mm terminal block Wiring Data on pairs 1/2 and 3/6 (10/100), all four pairs for Gigabit; power on pairs 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) AUDIO Streaming Two-way, full duplex Encoding 24 bit LPCM; AAC-LC 8/16/32/48 kHz; G.711 PCM 8 kHz; G.726 ADPCM 8 kHz; Opus 8/16/48 kHz Bitrate Configurable Input / output External microphone input or line input; line output I/O INTERFACE Configurable I/O Three configurable inputs / digital outputs Fixed input One Auxiliary supply 12 V DC output, max load 50 mA GENERAL & ENVIRONMENTAL Casing Polycarbonate, white NCS S 1002-B Indicators PoE LED, Power LED Mounting Wall, shelf or DIN rail (DIN clip sold separately) Operating temp @ 30 W -25 °C to 60 °C Operating temp @ 60 W -25 °C to 50 °C Operating temp @ 90 W -25 °C to 35 °C In AXIS T91G61 with outdoor PTZ -50 °C to 50 °C Humidity 10–85% RH (non-condensing) Start-up temperature -40 °C Storage -40 °C to 65 °C, 5–95% RH (non-condensing) Dimensions 56 x 80 x 184 mm (2.2 x 3.1 x 7.2 in) Weight 415 g (0.91 lb) Cable length 1.8 m Box content Midspan, installation guide, owner authentication key APPROVALS & COMPLIANCE Product markings UL/cUL, BIS, CE, KC, VCCI, RCM Supply chain TAA compliant AU/NZ EMC RCM AS/NZS CISPR 32 Class A Safety CAN/CSA C22.2 No. 62368-1 ed.2; IEC/EN/UL 62368-1 ed.2; IEC/EN 60950-1; IS 13252; CB Sustainability PVC free; RoHS (EU 2011/65/EU, EN 63000:2018); REACH (EC 1907/2006) Warranty 5-year Axis warranty Part number (AU) 02027-006 Downloads Axis TU8003 DatasheetAxis Midspan Installation Guide Frequently Asked Questions How much power does the TU8003 actually deliver?Up to 90 W at 54 V DC, using IEEE 802.3bt Type 4 and AXIS High PoE. Note the thermal derating: the full 90 W is rated to 35 °C ambient, 60 W to 50 °C and 30 W to 60 °C. What does portcast technology do?Portcast lets the midspan use the connected camera’s IP address, so its audio and I/O ports appear as if they were part of the camera. Audio and video travel in a single stream, which means no additional VMS licence for the audio channel. Which cameras is it designed for?Axis lists it as compatible with a broad range of Axis PTZ cameras (including the Q62 and P56 families), panoramic multidirectional cameras, radar devices and network speakers. Check the compatibility list on the Axis product page for your exact model. Can I run fibre into it?Yes. The unit has a 1 Gbit SFP slot that accepts Axis modules such as the T8611 (single-mode LC.LX), T8612 (multi-mode LC.SX) or T8613 (1000BASE-T). What I/O does it provide?Three configurable inputs/digital outputs plus one fixed input on a 6-pin 2.5 mm terminal block, along with a 12 V DC auxiliary output rated to 50 mA. Does it support two-way audio?Yes — two-way full duplex over a 4-pin 2.5 mm terminal block, with microphone or line input and line output. Encoding covers 24 bit LPCM, AAC-LC, G.711, G.726 and Opus. How is it mounted?Wall, shelf or DIN rail. The DIN rail clip (AXIS T91A03) is sold separately, as is the AXIS T91G61 Wall Mount used for extended cold-weather installs. Is it suitable for Australian power?Yes. Input is 100–240 V AC at 50–60 Hz and the unit carries RCM marking to AS/NZS CISPR 32 Class A. The AU part number is 02027-006. What warranty applies?Axis covers the TU8003 with its 5-year warranty. We supply genuine Australian-stock units, so warranty claims are handled locally. 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support
