Axxess AXDSPX-A2B2 is an AXDSP-X digital signal processor data interface package for select Ford models 2018-Up with Bang & Olufsen A2B amplifiers. It helps correct factory-radio audio processing, provides tunable preamp outputs for aftermarket amplifiers, and supports retained factory audio functions where applicable. At a Glance DSP data interface package for select Ford models 2018-Up with Bang & Olufsen A2B amplifiers Designed for select vehicles with a B&O A2B amplifier Package includes vehicle-specific harnessing for a cleaner integration 6 inputs and 10 individually assignable outputs Selectable 31-band graphic EQ or 5-band parametric EQ on each channel Selectable high-pass, low-pass, or bandpass filters Independent equalization and time delay on each output Clipping detection and limiting circuits Bass knob included Settings adjusted wirelessly through the AX-DSP-XL app Micro-B USB updatable Factory amplifier does not need to be retained Chimes and voice prompts route through the aftermarket amplifier Retains SYNC voice prompts when equipped System / Wiring Notes Designed for select vehicles with a B&O A2B amplifier Install location: at the factory amplifier Designed to be used with the factory radio in supported applications Factory prompts, chimes, parking alerts, OnStar, SYNC, Uconnect, or similar retained features depend on vehicle equipment and proper configuration DSP setup and tuning must be completed in the AX-DSP-XL app for the specific vehicle and audio system Exact Vehicle CompatibilityFind your vehicle below, then match the model year and factory-equipment details in the same row. Factory radio, amplifier, navigation, trim, speaker location, and connector differences can change which installation parts are required. If anything differs, contact MCOR before ordering. Make Model Years Factory Equipment / Qualifier Ford Bronco 2021-2023 B&O system; Factory amplifier location: Passenger Side Trunk Behind Seat. Ford Bronco Sport 2020-2023 B&O system; Factory amplifier location: Passenger Side Trunk Behind Seat. Ford EcoSport 2018-2022 B&O system; Factory amplifier location: Passenger Side Trunk Behind Seat. Ford Edge 2019-2023 B&O system; Factory amplifier location: Passenger Side Rear, Above Wheel Well. Ford Escape 2020-2023 B&O system; Factory amplifier location: Passenger Side Rear Quarter Panel. Ford Expedition 2018-2024 B&O system; Factory amplifier location: Left Rear Quarter Panel Ford Explorer 2020-2023 B&O system; Factory amplifier location: Left Rear Quarter Panel Ford F-150 2018-2020 B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. Ford F-150 2021-2024 B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. Ford F-250 2020 B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. Ford Mustang 2024-2026 B&O system; Factory amplifier location: Left rear corner panel Ford Ranger 2019-2023 B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. Fitment note: Year and model alone are not always enough to confirm compatibility. Match every factory-equipment qualifier shown for your vehicle, and contact MCOR Automotive if the radio, amplifier, navigation, speaker, camera, trim, or connector details are uncertain.Installation Notes Verify the vehicle is in the listed application range and has the required factory audio system before purchase Do not assume compatibility across similar vehicles, factory radios, amplifier packages, screen sizes, or radio codes Confirm exact vehicle fitment, factory radio, factory amplifier system, trim level, radio code, and connector style before purchase Additional installation parts may be required depending on the vehicle, factory equipment, and system design Programming, firmware updates, app setup, or DSP tuning may be required for proper operation Professional installation and tuning are recommended for best results Check the current Axxess vehicle fit guide and manufacturer instructions before installation What’s in the Box A2B data interface with built-in AXDSP-X technology, vehicle-specific T-harness, amplifier bypass harness, bass knob, and manufacturer instructions Technical Specifications Brand: Axxess Model: AXDSPX-A2B2 Product Type: DSP data interface with vehicle-specific harness Application: select Ford models 2018-Up with Bang & Olufsen A2B amplifiers Compatibility Type: Vehicle-specific Factory System Requirement: Designed for select vehicles with a B&O A2B amplifier Install Location: at the factory amplifier DSP Platform: AXDSP-X Inputs: 6 Outputs: 10 individually assignable EQ: 31-band graphic EQ or 5-band parametric EQ Filters: High-pass, low-pass, or bandpass Selectable Slope: 12, 24, 36, or 48 dB per octave Delay: Up to 10 ms per channel Tuning: Axxess AX-DSP-XL app Update Method: Micro-B USB Included Control: Bass knob Identifiers & Packaging MPN: AXDSPX-A2B2 UPC: 086429383993 Sold As: Each Included Components: A2B data interface with built-in AXDSP-X technology, vehicle-specific T-harness, amplifier bypass harness, bass knob, and manufacturer instructions Why Buy From MCOR Automotive Authorized retailer for the brands we sell Specialists in vehicle audio integration, radio replacement parts, and installation accessories 22+ years of professional automotive electronics experience Expert support for compatibility verification and proper setup
Related
Related
Related
Related