Azpects Sealer Remover Azpects Sealer Remover is a professional-grade, ready-to-use solution that effectively removes old sealants, surface coatings, varnish, and paint from stone, concrete, and other hardscape surfaces. Features 5 Liter container covers up to approximately 7.5 m² (about 80 ft²) Removes all traces of old or ineffective sealants and surface coatings from paving and driveways Ready-to-use formulation requires no mixing Also removes varnish and paint from wood and metalwork Leaves surfaces immediately ready for new sealer applications Installation Guide Step 1. Sweep: Brush away leaves and debris Step 2. Shake: Shake well before use Step 3. Test: Determine Working Times - To establish correct removal timings, suitability, and compatibility, always test an inconspicuous area before use by creating six small test samples of no more than 50mm round with the liquid generously applied. Apply the six samples simultaneously, spaced sufficiently apart to allow for individual washing and removal. Remove 1 sample at a time, at 30-minute intervals. This will give you the correct timing for the product, whichever sample is perfectly clean after washing. This is the timing you will need for the whole area. Step 4. Apply: Apply a thick, even coat at a rate of 1-1.5m2 per liter. Do not allow the product to dry out Step 5. Finish: After the length of time determined by your test patch, remove the surface coating with a power washer or a stiff brush and running water
