With exceptional ease of use, the operator-friendly Aztec Liquidator minimizes lay down time and ensures even, thorough solution coverage. When filled with water and the chemical appropriate for your job, this unit can apply up to 45,000 square feet of solution per hour. The 36 gallon solution tank is the largest applicator we have available in our floor application equipment section. You can dispense stripping solutions with this machine, but the Liquidator needs to be thoroughly rinsed out after each use.The Bright Solutions® 'NRS' No Rinse Floor Stripper we recommend works perfect with this machine, because the stripping solution is mixed with water. It comes packaged as 5 gallons, which makes approximately 50 gallons of stripper.The left valve control lever on the handle will dispense a 26" path of solution in front of the machine. The right valve control lever will dispense an additional 26" path from the manifold on the right. The right arm is spring loaded, so it will spring back to accommodate narrow areas. If the Liquidator is not laying down an even solution across the floor, the tank may need to be filled, or the spreader bar may have a tear in it and needs to be replaced.For complete step-by-step stripping instructions, please take a look at our floor stripping procedures guide. We also have another Aztec machine, which will apply your floor wax, after you're done using the Liquidator, it is called the automatic floor finish applicator.Features Applies over 45,000 ft² of solution in less than one hour. Adjustable applicator bar adjusts from 26" up to 52". Not motors, batteries, or power cord to ever worry about. The small, compact size, with a dry weight of 90 lbs., makes it very easy to maneuver.
