About This Five Components: A cross, a filter, and a spiral plate, a 7.00-inch plunger rod, equipped with a small closure nut and a solid stainless steel top rotary knob - without a lid - utilize your own lid to repair your faithful French press; it perfectly complements a 3.75-inch wide bottle cap and will excel in filtering your coffee. Instructions for Use: Disassemble the old plunger, insert the new rod into the hole on the flat cover, and secure the flat knob at the top. Next, on the other end of the rod, engage the fine threaded nut with a circular closed top facing the cover - if it is "cross-threaded", it may strip, so proper alignment is required. Add Three Filter Rods: Commencing with the spiral plate (nearest to the top), followed by the mesh filter in the middle, and subsequently the horizontal plate below. Poke the rod of the horizontal plate upwards through the mesh and spiral plate, and screw the end of the rod into the internally threaded rod. Rotate the closed nut until it abuts against the spiral plate. As good as new! High-Quality Materials: 304 grade stainless steel (SS) bolt shank with closed nut, cross plate with internally threaded shank, spiral plate, a 18/8 stainless steel wire mesh filter with a stainless steel toggle knob; try Cafe Crush Club's 34-ounce replacement glass - it features fire-resistant properties, our stainless steel inverted filter comes with a glass measuring device, significantly discounted, and can be perfectly used with French press bottles. Widely Usage: The use of a 7.00-inch rod is compatible with your flat lid, such as the BODUM flat-top Eileen, Brazilian flat lid, Kenyan, STARBUCK's, BIALETTI's, MIRO's, MENU's, and STERLING PRO's - glass or steel glass bottles. In fact, most flat lid brands are compatible, provided it is a 1-liter capacity, "8-shot espresso cup" 32|34 ounce French press coffee machine. Overview Material : Stainless Steel Brand : Generic Number of Pieces : 5 Unit Count : 5.0 Count Manufacturer : Guangdong Yiaize Electronics Technology Co., Ltd
