The Graupner mz-18 remote control with 9 channels is the perfect transmitter for almost all model aircraft. The transmitter is particularly suitable for advanced RC pilots. The proven Graupner 2.4 GHz HoTT technology guarantees interference-free and delay-free transmission, even over long ranges. The Graupner mz-18 has a 3.5 TFT color touch display. Received telemetry data can be read off clearly and programming can be carried out directly on the transmitter. As an additional safety feature, the mz-18 has an intelligent voice output - via loudspeakers or headphones. This provides telemetry data, warnings, alarms and vario signals.The mz-18 can store up to 30 models internally. If additional models or telemetry data are to be stored, the mz-18 has a micro SD card slot. The memory can therefore be easily expanded. Features: HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4GHz technology 75 jump frequencies for safe transmission 9 channels 3.5" TFT colour touch display for easy operation Intelligent speech output of telemetry data, warnings, alarms and Vario signal via loudspeakers or headphones Real-time data transmission with optional sensors (Vario, GPS, fuel, temperature, voltage, current, speed and much more) Teacher/student system wireless or wired Binding of several receivers possible Ball bearing billet units (total 8 units) µSD card slot for model memory expansion and telemetry data recording 30 model memories Model copy function Updateable via USB Model type: helicopter, flight model (normal or delta), glider model Numerous servo settings (travel, limit, reverse, center position) DualRate and Expo, separately adjustable for each flight phase 6 flight phases Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90° Pitch curves (7 points) separately adjustable for each flight phase Gas curves (7 points) separately adjustable for each flight phase Phase trims for pitch and gas Swash plate limiter function Swash plate mixing function 5 Linear mixer 3 curve mixer Numerous model aircraft types from 1QR to 4-flap surfaces Elevator: 1 HR, 2HR, V-tail Snaproll function Aileron differentiation, separately adjustable for each flight phase Butterfly function NEW: Security: FHSS, frequency hopping over up to 75 channels Maximum noise immunity through optimized frequency hopping, wide channel spread and antenna diversification Intelligent data transmission with correction function Extremely high range Range test and warning function low-voltage warning Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional up to 2.5 V) Numerous fail-safe functions Keylog function to prevent unintentional menu changes Precision: Shorter response times adjustable (10ms period time) No additional delays due to module processors. All hopping management is done directly from the 32-bit main processor. Synchronous servo run possible by simultaneous control of the servo outputs in blocks of 4 Pilot feeling: Largely instantaneous control reactions through direct processing Telemetry evaluation in real time Wireless teacher/student function More characteristics: Simple and extremely fast binding Free channel assignment (channel mapping), transmitter and receiver mixing functions and all servo settings can be easily programmed Binding of any number of receivers for channel expansion (max. 16 channels). The last bound receiver sends the telemetry data. Future-proof due to update capability via USB interface
Related
Related
Related
Related