Description A.Y. McDonald Jet Pump Motor - NEMA C, 3/4-1.5 HP Baker Water Systems Nema C (Keyed Shaft) Motor for 1500 Series Jet Pumps. Single phase, Open Drip Proof (ODP) capacitor start. Carbon steel shaft not in contact with water. Shaft 0.625" diameter x 2.07" long from face. Continuous duty at 40°C/104°F ambient, 60Hz. Automatic reset thermal overload protector. Round frame without base, Nema 56C mounting. Power leads and ground wire supplied. Voltage change device included. Technical Details Carbon steel shaft (not in contact with water) Shaft 0.625" diameter x 2.07" long from face Ball bearings (locked drive end bearing) Continuous duty at 40°C/104°F ambient, 60Hz Automatic reset thermal overload protector Round frame (without base), Nema 56C mounting Power leads and ground wire supplied Voltage change device included Factory wired 230V Frame: 48/56 | Voltage: 230/115 Nema C Motor For 1500 Series Jet Pumps (Single Phase, ODP, Keyed Shaft, Capacitor Start) Two Compartment Products | E-Z Access Part No. HP RPM Frame Catalog Volt Type Service Factor SF* Amps MTR Lgth (1) Ship Wt. Factory Wired 6127-154 3/4 3500 48/56 230/115 FHP 1.5 7.4/14.8 9.5" 21 230V 6127-160 1 3500 48/56 230/115 FHP 1.65 9.0/18.0 10" 24 230V 6127-156 1 1/2 3500 48/56 230/115 FHP 1.3 10.7/21.4 10.5" 28 230V *Service Factor Amps may vary with motor manufacturer - refer to label on motor *Includes run capacitor for higher efficiency (1) Length not including shaft (2) Contact factory for three phase and/or TEFC motors Datasheets Jet Pump Motors
