Compatibility: ALLSize/mm: 218*204*69Bambu Lab PLA-CF Matcha Green is a carbon fiber reinforced PLA filament designed for rigid prototypes, functional components, and models that need a premium matte appearance. The combination of PLA and carbon fiber improves hardness and bending stiffness while maintaining the dimensional stability and convenient printing characteristics associated with PLA.The Matcha Green color gives printed models a distinctive natural tone. The matte surface helps reduce visible layer lines and creates a clean, professional finish. This makes the filament suitable for engineering prototypes, mechanical models, fixtures, enclosures, tools, accessories, decorative objects, and presentation-ready parts.Carbon Fiber Reinforced PLAPLA-CF contains carbon fibers that increase material stiffness and help printed parts maintain their intended shape. The reinforced composition is useful for models where rigidity, dimensional accuracy, and surface quality are important.The matte finish makes layer lines less noticeable than on many standard glossy filaments. Printed components can achieve a refined appearance directly from the build plate, reducing the need for extensive sanding or other post-processing.Recommended Printing SettingsBambu Lab PLA-CF has a standard filament diameter of 1.75 mm and a net filament weight of 1 kg. Bambu Lab recommends using a 0.4, 0.6, or 0.8 mm nozzle. The recommended nozzle temperature is 210–240°C, while the recommended bed temperature is 35–45°C. Printing speed should remain below 200 mm/s.Carbon fiber filled materials can be abrasive. Use a printer and nozzle that are compatible with carbon fiber reinforced filament. Actual settings may vary depending on the printer, nozzle, build plate, model geometry, and printing environment.Key Features• Carbon fiber reinforced PLA filament • Matcha Green color with a premium matte finish • Improved hardness and bending stiffness • Good dimensional stability for accurate models • Reduced visibility of printed layer lines • Suitable for prototypes and functional components • Standard 1.75 mm filament diameter • Net filament weight: 1 kg • Recommended nozzle sizes: 0.4, 0.6, or 0.8 mm • Recommended nozzle temperature: 210–240°C • Recommended bed temperature: 35–45°C Storage and PreparationStore the filament in a sealed container with desiccant and maintain humidity below 20% RH. Bambu Lab recommends drying the material at 55°C for eight hours before printing when necessary. Proper storage helps support consistent extrusion, dimensional accuracy, and surface quality.Choose Bambu Lab PLA-CF Matcha Green for rigid, accurate 3D prints with a distinctive green color and smooth matte appearance.
