Bambu Lab A1 Mini Combo, is a great, easy-to-use printer for the first time user to the most experienced. The easy setup and calibration make this printer a pleasure to use day in and day out. Take your printing to another level with the fully automated AMS-Lite system for printing in up to 4 colours Product Features Full-auto Calibration. 4-Color Printing with AMS lite. Under 48 dB Low Noise in Silent Mode. Full-metal Linear Rails and Bearings. Vibration and Flow Rate Compensation. * To connect the A1 mini printer to the AMS/ AMS 2 Pro/ AMS HT, an AMS HUB (SA013) accessory is needed * Cybersecurity compliant with EU RED Article 3.3(d)(e) and ETSI EN 303 645 V2.1.1:2020. Learn more. Bambu LabA1 mini Combo Multi-Color Printing Plug-N-Play Active Flow Rate Compensation Full Auto Calibration Active Motor Noise Cancelling High Speed Precision Multi-Color Printing The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone. Active Flow Rate Compensation The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy. Full Auto Calibration The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. Plug-N-Play The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. Active Motor Noise Cancelling The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise. Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision） Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments. Sync with Bambu Studio and Bambu Handy Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos. A1 mini Tech Specs Item A1 mini Specification Body Build Volume(W*D*H) 180*180*180 mm³ Toolhead Hot End All-Metal Nozzle Stainless Steel Max Hot End Temperature 300 °C Nozzle Diameter 0.4 mm (Included)0.2 mm, 0.6 mm, 0.8 mm Heatbed Build Plate Bambu Textured PEI Plate (Included)Bambu Smooth PEI Plate Max Build Plate Temperature 80°C Speed Max Speed of Tool Head 500mm/s Max Acceleration of Tool Head 10000mm/s² Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET,Carbon/Glass Fiber Reinforced Polymer Not Recommended Sensors Monitoring Camera Low Framerate Camera (Up to 1080P)Timelapse Supported Filament Run Out Sensor Yes Filament Odometry Yes Power Loss Recover Yes Filament Tangle Sensor Yes Physical Dimensions A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kgA1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg Download A1 mini TDS Full advanced features of A1 mini 3D printers : Learn more Bambu Lab A1 mini Combo What's in the box A1 mini Spool Holder Purge Wiper Build Plate PTFE Tube*1 Bambu Filament Samples-20g(Random Color) Stainless Steel Nozzle（Included） Accessory Box A1 mini Combo Add-ons AMS lite Stand AMS lite Body AMS lite Rotary Spool Holder (x4) PTFE Tube*3 Frequently asked questions 1.What's the difference between AMS and AMS lite? Does the AMS lite work with any Bambu printer or even other (brand) printers? A: AMS is enclosed and the AMS lite is non-enclosed.AMS is incompatible with the A1 mini. If you want a multi-color print using A1 mini, you must use the AMS lite.AMS lite is incompatible with the X1 or P1 printer and other (brand) printers. If you want a multi-color print using an X1 or P1 printer, you must use AMS. For more details, please check here. 2.What materials can the A1 mini print? A: The A1 mini can print most of the materials on the market that don't require an enclosure, such as PLA, PETG, TPU, and their support filament. It is not recommended to print filaments such as ABS, ASA, PC, PA,and PET that require higher bed and chamber temperatures.For more details, please check here. 3.What is the maximum print size of the A1 mini? A: 180 * 180 *180 mm. For more product specifications , please refer to this page. For more details, please check here.
