Product Features Active Air Vent 65°C Filament Drying Air-tight Filament Storage Up to 24-color/Multi-material Printing Brushless Servo Feeding Motor RFID filament sync mportant notice The AMS requires specific accessory configurations for various Bambu Lab 3D printers. Please add the required accessories from the section below. See the Multiple AMS Units Connection Guide for detailed setup instructions. NOTE: To connect a single AMS 2 Pro unit to X1/P1 series printer, a Filament Buffer (SA003), a PTFE Tube Coupler (FAZ006), and a 4-pin Cable (CAB002-N) are required. X1/P1 series printer can connect up to 4 AMS units(including AMS HT, AMS, AMS 2 Pro). For drying function: One Switching Adapter is required for each AMS 2 Pro unit. For H2D owners, your H2D can power anyone of the AMS 2 Pro(s) connected for drying, so if you're not planning to run multiple AMS 2 Pro for drying simultaneously, you won't be needing an adapter. 24-Colors/Multi-material Serially connect up to 4 AMS 2 Pro & 8 AMS HT units, total of 24 filaments Electro-Magnetic Air Vent Fast filament drying & air-tight filament storage 65°C Drying Up to 65°C drying temperature Brushless Motor 60% faster feeding speed Description X1 Series and P1 Series are compatible with AMS 2 Pro. If only using the automatic filament feeding function, only the 6-pin bus cable, 4-pin bus cable, Filament Buffer/AMS Hub, PTFE Tube and PTFE Tube Coupler are required, and no external power adapter is needed. However, if you need to use the drying function, an external power adapter is required for the AMS 2 Pro. 24-Colors/Multi-material Serially connect up to 4 AMS 2 Pro & 8 AMS HT units, total of 24 filaments Dry Filament Quickly and Intelligently Electro-Magnetic Air VentAutomated venting facilitates dehumidification during drying and ensures airtight sealing for weeks of high-quality printing. Auto-rotate Drying Auto-rotate DryingDuring the drying process, the filament spools rotate automatically to ensure more even drying. RFID SyncAMS 2 Pro uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed. Speed Up! Faster Multi-material Printing!The powerful Bambu permanent magnet synchronous servo motor accelerates filament feeding by 60% for enhanced efficiency. Saves an average of 10 minutes per 100 filament changes. Evolved, Polished Design Details Tool-Free Filament Tubes AccessRemoving snapped filament from the first-gen AMS requires extracting all spools and disassembling the shell with two screws, taking 3-5 minutes. In contrast, the AMS 2 Pro offers direct, tool-free access to filament tubes from the top. Ceramic InletCeramic filament inlets with Vickers hardness of 1200 significantly enhances durability. Compatible With All Bambu Lab PrintersThe AMS 2 Pro is compatible with all Bambu Labs products. What’s in the Box Bambu AMS 2 Pro Desiccant PTFE Tube Bambu Bus Cable-6Pin AMS 2 Pro Specs
