Print in color with the best multi-color unit on the market, the Bambu Lab AMS. Compatible with most materials, including PLA, ABS, ASA, PETG, PC, etc. Each Bambu Lab AMS is composed of 4 filament slots, and up to 4 AMS can be installed in parallel and supports up to 16 colors for stunning prints that truly stand out. To achieve 16-color printing, connect 4 AMS via AMS hub Product Features Multi-Colors/materials Capability Keep Filament Dry Filament Runout & Winding Detection AMS Filament Backup Important notice The AMS requires specific accessory configurations for various Bambu Lab 3D printers. Please add the required accessories from the section below. See the Multiple AMS Units Connection Guide for detailed setup instructions. Bambu Lab AMS - Innovation of 3D printing technology Make Multi-Color 3D Printing Real Color, the ultimate expression of emotions, is brought to you by Bambu Lab's Automatic Material System (AMS). You can now enjoy printing freely in multiple colors and materials. Multi-Material Printing Applicable to most materials such as PLA, ABS, ASA, PETG, PC, etc. Hassle-Free Support Removal With AMS, Bambu Lab printers can use snap-away support material or dissolvable filament to minimize the pain of removing supports. No More Filament Leftover Without AMS, when the filament runs out, manual spool replacement interrupts printing and results in wasted filaments. With AMS, there is a seamless transition to a new spool which keeps uninterrupted printing and minimizes waste. Filament Backup Your print never stops with automatic spool changing. With AMS filament backup function, never worry about running out of filament during your sleep or absence, ensuring a seamless and uninterrupted printing process, preventing any filament waste and promoting energy efficiency. Advanced Intelligent System Powered by a 32-bit MCU, sensor arrays, actuators, and a smart algorithm, the AMS has reached unprecedented levels of intelligence. It expertly manages filament loading and unloading, along with efficient fault detection and recovery. For more detailed information please refer to AMS feeding system. Filament Tangle Detection When the filament at the toolhead encounters resistance, it may be that the filament is tangled or the spool is stuck, AMS can detect it immediately and suspend printing to avoid air printing. For more detailed information please refer to filament entangled. Say Goodbye to Wet Filaments Filament that has absorbed moisture can lead to print quality issues and poor layer adhesion, or even nozzle clogging that can lead to a failed print. Keep the Filament Dry The AMS has an air-tight seal and with the help of dessicant material, it absorbs moisture to keep the moisture away from Filament. A Humidity Sensor also detects the humidity inside the AMS and provides information to the user when the humidity is higher or the dessicant may need to be replaced. For best print quality, dry filament is required. Automatic Filament Identification Bambu Lab filaments use RFID which is read by the AMS to automatically identify and apply the best settings for your material. The RFID tag is synchronized automatically to Bambu Studio. Non Bambu Lab Filaments need to be manually configured in Bambu Studio or in the printer. Support Up to 16 Colors Each Bambu Lab AMS is composed of 4 filament slots, and up to 4 AMS can be installed in parallel and supports up to 16 colors for stunning prints that truly stand out. To achieve 16-color printing, connect 4 AMS via AMS hub What's in the box AMS PTFE Tube Bus Cable - 6pin & Bus Cable - 4pin Spare Filament Cutter (x2) PTFE Tube Connector Filament Buffer Reusable Spool (x3) High Temperature Reusable Spool AMS Tech Specs Item AMS Specification Product Size 368*283*224 mm Package Size 445*350*320 mm Product Weight 2.5 kg Gross Weight 4.68 kg Material ABS Supported Filament PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dry), BVOH (dry), PP, POM, HIPS and Bambu PLA-CF/ PAHT-CF/ PETG-CF Unsupported Filament* TPE, TPU, PVA (wet), BVOH (wet), Bambu PET-CF/ TPU 95A and other brand's filaments that contain carbon fiber or glass fiber Filament Diameter 1.75 mm Supported Spool Size* width: 50-68 mm, diameter: 197-202 mm *Filaments that are too soft, brittle or brasive are not compatible with the AMS, such as Bambu PET-CF/ TPU 95A, TPE, PVA (wet), BVOH (wet), and other brands' PET-CF/GF, PA-CF/GF, PAHT-CF/GF,etc. If you prefer to use cardboard spools, we highly recommend using a spool adapter to reduce the risk of slippage and trapped debris in the AMS. For more detailed information please refer to Filament Guide. Learn more about how AMS works.
Related
Related
Related
Related