This is the answer many have been waiting for - now you have a dryer that can dry high temperature filaments (85c max drying), and also keeps that filament dry when done! From Bambu: Product Features Active Air Vent 85°C Filament Drying Air-tight Filament Storage Up to 24-color/Multi-material Printing Brushless Servo Feeding Motor RFID Filament Sync AMS HT is temporarily not compatible with X1E Important Notice For A series owners: To connect the A series printer to the AMS/ AMS 2 Pro/ AMS HT, an AMS HUB (SA013) accessory is needed. For X1/P1 series owners: If only connecting one AMS HT to the printer, the PTFE tube coupler(FAZ006), 4-pin cable(CAB002-N) and Filament Buffer(SA003) are required. If connecting multiple AMS(including AMS HT, AMS, AMS 2 Pro) , we recommend that you purchase the PTFE tube coupler(FAZ006), 4-pin cable(CAB002-N) and AMS Hub(SA002-N) . For P2 series owners: If connect 1 or 2 AMS (including AMS HT, AMS, AMS 2 Pro) to the printer, a Filament Buffer - P2S (SA011) and a Bambu Bus Cable (CAB035) is needed. To connect more than 2 AMS(including AMS 2 Pro, AMS HT), Filament Buffer - P2S (SA011), a Bambu Bus Cable (CAB035) ,and a 4-in-1 PTFE Adapter (FAZ013-N) is needed. For H2S owners: To connect more than one AMS(including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed. For H2D/H2C owners: To connect more than 2 AMS(including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed. Bambu Lab AMS HT Specialized for High-Performance Materials 24-Colors/Multi-material Serial connect up to 4 AMS 2 Pro & 8 AMS HT, total of 24 filaments Electro-Magnetic Air Vent Fast filament drying & air-tight filament storage 85°C Drying Temp Specialized for high-performance filament drying Brushless Motor 60% faster feeding speed Engineered To Better Dry & Use High-performance Filaments High-temp Drying Drying temperature up to 85°C, optimized for high-temperature materials Bypass Outlet Independent filament outlet designed for soft or brittle materials Dry Filament Quickly and Intelligently Electro-Magnetic Air Vent Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing Auto-rotate Drying During the drying process, the filament spools rotate automatically to ensure more even drying RFID Sync AMS HT uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed Dry Moist Bambu PET-CF Evolved, Polished Design Details Ceramic Inlet Ceramic filament inlets with Vickers hardness of 1200 significantly enhances durability Over Temperature Protection Accurate temperature sensor and physical failsafe for safe, precise heating Status Display Clear digital display for easy monitoring of drying status Compatible With All Bambu Lab Printers The AMS HT will be compatible with all Bambu Lab products. AMS HT Specs Item Specification Body Dimensions 114*280*245 mm³ Net Weight 1.21 kg Housing Material PC/PA Flame Retardant Grade UL 94 V-0 Screen Supports displaying real-time temperature and humidity, and remaining drying duration. Printing Filament Supported PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF/PAHT-CF/PETG-CF/Support for PLA/PETG, and TPU for AMS.Bypass Filament Outlet: TPE, generic TPU, Bambu PET-CF/TPU 95A, and other filament that contains carbon fiber or glass fiber. Filament Not Supported PVA (damp), BVOH (damp) Filament Diameter 1.75 mm Spool Dimension Width: 50 mm-68 mm Diameter: 197 mm-202 mm RFID Identification Supported Filament Odometry Supported Drying Maximum Temperature 85 °C Filament Supported PLA, PETG, Support for PLA/PETG, ABS, ASA, PET, PA, PC, PVA, BVOH, PP, POM, HIPS, Bambu PLA-CF/ PAHT-CF/ PETG-CF, and TPU for AMS Active Moisture Discharge Supported Rotating Drying Mode Supported Sealed Storage Supported Top Lid Open Detection Supported Temperature and Humidity Detection and Maintenance Supported. Real-time information can be displayed on the screen, printer UI, Bambu Studio, and Bambu Handy. Voltage DC: 24 V AC: 100 V–240 V~, 50 Hz/60 Hz Average Power 150 W Download TDS What’s in the Box Bambu AMS HT Desiccant PTFE Tube (263mm*2+900mm*1) Bambu Bus Cable-6Pin Power Cord (For AMS HT ONLY) Explore more about AMS HT 1.What is the difference between the two discharge ports on the back of the machine? The port at the rear of the top cover is specifically for TPU filament. Due to the softness of the TPU filament, it is easy to fail when using the AMS 2 Pro automatic feeding function. When using the TPU, insert it into the AMS HT and ensure the material tray rotates in the correct direction. Insert the material tube into the TPU output port and manually push the filament through the PTFE tube until it is fully loaded into the extruder. Note: 1.When using TPU, AMS HT cannot use the automatic feed and return function, but can be used as a drying box to prevent material moisture. 2.AMS HT won't be able to run filament drying while feeding filament and initiating a print via the bypass port. 2.Can the AMS HT be used with the X series and P series printers? If only connecting one AMS HT to a X or P series printer, the PTFE tube coupler, 4-pin cable and Filament Buffer are required. If connecting multiple AMS HT units, we recommend that you purchase an AMS Hub. AMS HT compatibility with A1 and A1 mini printers will be added through an OTA update in Q3 2025. For more information please refer to: wiki. 3.Can I print and dry at the same time? Printing while drying is not yet supported, including all the AMSs that are related to the on-going print job (eg. The AMSs assigned for auto-refill). However, you can dry filament in AMSs that are not assigned to the on-going print job. 4.How many AMS HT units can be connected to the X1 series and P1 series at most? X1 and P1 series printers support up to 4 AMS HT connections at the same time. 5.Can the AMS HT be directly connected to the printer for drying? H2D and X/P/A series printers are connected to AMS HT and use drying function. Each AMS HT requires an external 220V power supply for drying It is not supported to draw power from the printer for drying (The power adapter is pre-included with the product package). 6.Does it support standalone drying without connecting to the printer? When using the AMS HT drying function, the AMS HT must be connected to the printer via a 6-pin bus cable to ensure that the printer is powered on and set to filament drying mode. The AMS HT cannot perform standalone drying without a connection to the printer.
Related
Related
Related
Related