The Bambu Lab H2C redefines multi-material printing with its Vortek hotend swap system—six colors or seven materials in one print, purge waste as low as 532g. Its closed-loop servo extruder delivers 10kg force (70% more than stepper motors) with AI-powered error detection. The 65°C heated chamber and 350°C nozzles handle engineering materials effortlessly. From multi-color models to flexible joints printed in one piece, the H2C turns complex ideas into seamless reality. Experience true multi-material mastery—get the Bambu Lab H2C today. • Hotend Change Multi-material Printing • Minimal Purge Waste Multi-Color Printing • Precise & Fast Inductive Nozzle Heating • Closed-loop Servo Extruder • Full Filament Path AI Error Detection • 350°C Nozzles & 65°C Active Heated Chamber • Optional 10W/40W Laser and Cutting Module • 330*320*325 mm³ Build Volume Purge Saving Multi-Color PrintingPainting intricate models is a thing of the past — the H2C brings your designs to life with six-color printing and a versatile seventh nozzle for support or an additional color. This whole thing is printed in 2 parts. The main raptor is 6-color and the base is another 6-color. Purge Saving Multi-Material PrintingWith the H2C, you can print up to seven different materials in a single run — no nozzle purging required. Combine multiple material properties in one seamless structure and take integrated design to a whole new level. Integrated TPU Joints for Multi-Color PartsPrint durable TPU ball joints for your robot models — flexible, long-lasting, and built for endless motion. Small Form Factor,More FilamentsBecause only the hotend is swapped, the system can house up to six replaceable hotends without significantly reducing the build volume. That means more materials, more colors, and more possibilities — all in one print. Colors Are No Longer Limited By How Many Toolheads You HaveUnlike traditional tool-changer printers that limit color count by the number of toolheads, the H2C supports up to 24 materials in a single print through parallel-connected AMS units. Its intelligent algorithm optimizes filament-to-hotend allocation to minimize purge waste while delivering outstanding multi-color and multi-material results. Dedicated Hotends for Specific FilamentsThe H2C’s Vortek system lets you dedicate one of its six interchangeable hotends to specific filaments — a game-changer for valuable engineering materials. This ensures superior consistency and reliability across prints. Each hotend can even automatically store filament information, so the next time you load that material, it’s instantly matched to the correct hotend. Item Specification Printing Technology Fused Deposition Modeling Body Build Volume (W*D*H) Single Nozzle Printing: 305*320*325 mmc Dual Nozzle Printing: 300*320*325 mmcTotal Volume for Two Nozzles: 330*320*325 mmc Chassis Aluminum and Steel Outer Frame Plastic and Glass Physical Dimensions Physical Dimensions 492*514*626 mmc Net Weight 32.5 kg Toolhead Extruder Gear Hardened Steel Nozzle Hardened Steel Max Nozzle Temperature 350 °C Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm Filament Cutter Built-in Filament Diameter 1.75 mm Extruder Motor Bambu Lab High-precision Permanent MagnetSynchronous Motor Heatbed Build Plate Material Flexible Steel Plate Included Build Plate Type Textured PEI Plate Supported Build Plate Type Textured PEI plate, Engineering Plate Max Heatbed Temperature 120 °C Speed Max Speed of Toolhead 1000 mm/s Max Acceleration of Toolhead 20,000 mm/s2 Max Flow for Hotend 40 mm*/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature) Chamber Temperature Control Active Chamber Heating Supported Max Temperature 65 °C Air Purification Pre-filter Grade G3 HEPA Filter Grade H12 Activated Carbon Filter Type Granulated Coconut Shell VOC Filtration Superior Particulate Matter Filtration Supported Cooling Part Cooling Fan Closed Loop Control Cooling Fan for Hotend Closed Loop Control Main Control Board Fan Closed Loop Control Chamber Exhaust Fan Closed Loop Control Chamber Heat Circulation Fan Closed Loop Control Auxiliary Part Cooling Fan Closed Loop Control Toolhead Enhanced Cooling Fan Closed Loop Control Supported Filament Type PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS Sensor Live View Camera Built-in; 1920*1080 Nozzle Camera Built-in; 1920*1080 BirdsEye Camera Built-in; 3264*2448 Toolhead Camera Built-in; 1920*1080 Door Sensor Supported Filament Run Out Sensor Supported Filament Tangle Sensor Supported Filament Odometry Supported with AMS Power Loss Recovery Supported Electrical Requirements Voltage 100-120 VAC / 200-240 VAC, 50/60 Hz Max Power* 1800 W@220 V/1250 W@110 V Typical Power 200 W@220 V/200 W@110 V (Single Nozzle Printing PLA) Working Temperature 10 °C-30 °C Electronics Touchscreen 5-inch 720*1280 Touchscreen Storage Built-in 8 GB EMMC and USB Port Control Interface Touchscreen, mobile App, PC App Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7 Application Processor Quad-core 1.5 GHz ARM A7 Neural Processing Unit 2 TOPS Software Slicer Bambu Studio supports third-party slicers that export standard G-code, such as Super Slicer, PrusaSlicer, and Cura, but certain advanced features may not be supported. Supported Operating System MacOS, Windows, Linux Network Control Ethernet Not Available Wireless Network Wi-Fi Network Kill Switch Not Available Removable Network Module Not Available 802.1X Network Access Control Not Available Wi-Fi Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)2400 - 2483.5 MHz,5150 - 5850 MHz (SRRC) Wi-Fi Transmitter Power (EIRP) 2.4 GHz: «23 dBm (FCC); «20 dBm (CE/SRRC/MIC)5 GHzBand1/2: «23 dBm (FCC/CE/SRRC/MIC)5 GHz Band3: «30 dBm (CE); «24 dBm (FCC)5 GHz Band4: «23 dBm (FCC/SRRC); «14 dBm (CE) Wi-Fi Protocol IEEE 802.11 a/b/g/n
Related
Related
Related
Related