Revolutionise How You Print Your Projects Vortek Hotend Change System Multi-Material Printing with Minimal Purge Waste In traditional single-nozzle multi-material printing, purging is needed to clear leftover material between filament changes. Vortek chanes that with an intelligent hotend-swapping system that replaces the entire hotend; delivering faster, cleaner prints with minimal waste. Fully Automatic Filament Change The Vortek system works seamslessly with our highly reliable AMS (Automatic Material System), making the entire filament change process fully automatic; no need to manually load each filament into the toolhead. Always Delivering the Most Efficient Combination The Vortek system can store filament information in the hotend's memory, ensuring the correct filament is matched to each hotend. If you are printing with more than seven filament types, the system can calculate the optimal combination to minimise purge waste. Why Vortek? Small Form Factor, More Filaments Because only the hotend is swapped, the system can house up to six replaceable hotends without significantly reducing the build volume. That means more materials, more colours, and more possibilities; all in one print. 8-Second Induction Heating Our industry-leading induction heating technology brings the nozzle to temperature in 8-sec, significantly reducing the preheating time for each material swap compared to traditional methods. Contactless Design for Reliability Our high standards for reliability led us to move away from contact-based metal pins which are prone to oxidation and unstable connections. We developed a contactless solution that ensures a stable, high-frequency connection; the foundation for precise temperature control and intelligent hotend sync. Colours Are No Longer Limited By How Many Toolheads You Have Unlike tradtional toolchanger printers that limit colour count by the number of toolheads, the H2C supports up to 24 materials in a single print through parallel-connected AMS units. Its intelligent algorithm optimises filament-to-hotend allocation to minimise purge waste while delivering outstanding multi-colour and multi-material results. Enclosed for High-Performance Printing With its seamless enclosure and adaptive airflow system, the H2C maintains a stable chamber temperature for high-performance materials and filters the air to keep your workspace clean and safe. Fully Automatic Nozzle Offset Calibration Our inductive nozzle offset calibration is fully automated; no manual steps, no calibration plates, no extra setup. In just a few minutes, the H2C precisely calibrates nozzle offset to within 25 microns.* Dedicated Hotends for Specific Filaments The H2C's Vortek system lets you dedicate one of its siz interchangeable hotends to specific filament; a game-changer for valuable engineering materials. This ensures superior consistency and reliability across prints. Each htoend can even automatically store filament information, so the next time you load that material, it's instantly matched to the correct hotend. Top Tier Printing Performance Better High-Speed Reliability & Real-Time Error Detection The PMSM servo extruder delivers up to 10kg of maximum extrusion force - 70% more than stepper motors; dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20kHz, actively detecting filament grinding and clogs in real time. 50µm Ultra-Fine Motion Accuracy* With its Vision Encoder, the H2C achieves a distance-independent motion accuracy of less than 50 μm—thinner than human hair. The system automatically compensates for any mechanical drift during calibration, ensuring consistent precision and peak performance over time.* Smooth Surface, Sharp Edges The H2C leverages both the servo motor on the extruder and the high-resolution eddy current sensors on the nozzle to sense extrusion dynamics. This enables precise extrusion control and automatic calibration of Pressure Advance (PA) parameters for each filament, resulting in smoother surfaces and cleaner, sharper edges. Unleash The Full Potential of High-Performance Materials The H2C's 65 °C actively heated chamber & 350°C Nozzles minimises warping and deformation while enhancing layer adhesion for high-performance, high-temperature filaments. Chamber Heater 350°C Nozzles Comprehensive Print Monitoring The H2C is equipped with an array of 59 sensors* and a quad-camera computer vision system, all orchestrated by our proprietary neural algorithm. During printing, this system delivers intelligent, real-time diagnostics that can detect even the most subtle print anomalies as they happen. You don't have to be an expert to solve problems—your printer does the job for you. AI Camera The H2C features an AI-backed camera system. This intelligent monitoring system continuously tracks extrusion patterns, immediately detecting material accumulation, filament deviations, and extrusion failures. Also runs a pre-flight scan to ensure a safe start. Pre-Flight Spaghetti Nozzle Clumping Air Printing Safety, Checked! Best-In-Class Air Filtration The H2C's three-stage filtration system is essential for printing with engineering filaments. This powerful combination of a G3 pre-filter, an H12 HEPA filter, and a coconut shell activated carbon filter effectively minimises the odours and harmful particulates often released by engineering materials. Fire-Retardant Construction The H2C's chamber is constructed entirely with flame-retardant material, providing robust, passive fire safety protection across the entire enclosure. Flexible Network Security & Connectivity The H2C offers convenient cloud connectivity for remote control from any device. For security-sensitive applications, it also provides full offline functionality, ensuring complete physical isolation. Users can operate the printer, send files, and update firmware without an internet connection. For advanced users, Developer Mode enables MQTT port access for integrating third-party components and software.* Specifications Unboxing Video Includes Note * All the demonstrated print time & purge waste data are calculated results by Bambu Studio.* The advertised Vortek features & advantages are based on fully utilizing 6 induction hotends of same diameter and corresponding AMS units.* All product data for the H2C is based on Bambu Lab’s internal testing. Actual results may vary due to individual product differences, user habits, and environmental conditions. Please refer to actual usage for reference.* The optional Vision Encoder is required for Motion Accuracy Enhancement.* Auto Holes-contour Compensation must be enabled in Bambu Studio, and designated Bambu filament must be used.* DynaSense Extruder filament grinding feature limited by filament type.* "59 sensors" is refer to fully equipped H2C Laser Edition with Bird's Eye camera and 6 induction hotends.* High-flow Hotends are optional equipments, buy at official store.* Due to safety protocol, Developer mode cannot be enabled when using Laser and Cutting functions.* Push notifications require use of Bambu Handy and cloud connectivity.* Creator projects are provided for illustrative purposes only. Bambu Lab does not endorse, and disclaims any representations or warranties regarding creator projects, including, without limitation, the safety, marketability, or usability of any 3D printed works based on such projects. See our Terms of Service for more information.* The 8-second heating time for induction hotend is based on Bambu PLA Basic printing temperature.* The “no purging” claim does not include the initial purge required when loading a brand-new filament into a hotend.* The fire-retardant chamber is made using UL94 V-0 grade materials. Browse More Browse all Bambu H2D Browse all Bambu Filament Browse all Bambu Lab
