Quick Swap Nozzle Design The special design of H2 Series / P2S / X2D hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. Simply unlock the latch for quick and easy hotend removal and installation. *Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns. Your browser does not support our video. 0.2mm Nozzle - Optimal Print Fineness Smaller diameter extrudes thin filaments High resolution on the horizontal print surface 0.6mm and 0.8mm Nozzle - Faster Print Speed Larger diameter extrudes more filaments per second, resulting in faster print speed Your browser does not support our video. Comparison of Different Nozzle Sizes Please Note: Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality. Compatibility: H2D, H2D Laser, H2D Pro, H2S, H2S Laser, H2C (Left) P2S and X2D In the Box Hotend with Nozzle *1 Product Specifications Max Printing Temp: 350 ℃ Length: 49.2 mm Manufacturer Number (.4mm Hardened Steel): FAH060 (NEW), FAH023 (OLD) Manufacturer Number (.6mm Hardened Steel): FAH061 (NEW), FAH024 (OLD) Manufacturer Number (.8mm Hardened Steel): FAH062 (NEW), FAH025 (OLD) Manufacturer Number (.2mm Stainless Steel): FAH059 (NEW), FAH026 (NEW)
