Bambu Lab P2S 3D Printer

CAZ 3D Verified independent store

→

Note: The standalone P2S (without AMS) does not include a filament buffer. For AMS/AMS 2 Pro owners, to connect P2S you may need to have a Filament Buffer - P2S (SA011) and Bambu B us Cable (CAB035). Please be aware that the absence of the filament buffer will affect the accuracy of filament tangle detection feature. *To connect more than 2 AMS(including AMS 2 Pro, AMS HT), Filament Buffer - P2S (SA011), a 6pin Bambu Bus Cable (CAB035) ,and a 4-in-1 PTFE Adapter (FAZ013-N) is needed. Product Features 5-Inch Touch Screen AI Failure Detection Auto Flow Dynamics Calibration Multi-Color Printing Cold-Air Cooling Active Venting Filament Drying 256*256*256 mm³ Print Volume * Cybersecurity compliant with EU RED Article 3.3(d)(e). Learn more. Highlights 5-inch Refreshed Touchscreen Cold-Air Cooling Engineering Filaments Ready Quick-Swap Nozzle PMSM Servo Extruder Silky-Smooth Liveview Auto Flow Dynamics Calibration Active Venting Filament Drying AI Error Detection The User Experience As Good As A Smartphone. The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions. 5-inch Touch Screen ｜ 2nd-Gen UI 70% More Extrusion Force & Real-Time Error Detection. The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time. PMSM Servo Architecture ｜ DynaSense Extruder Print Smooth At Every Corner, Always. The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner. Active Flowrate Compensation ｜ Eddy Current Pressure Sensorent Pressure Sensor On Off Adaptive Airflow System Perfect Overhang No Matter the Filament or Temperature. Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs. Cold-Air Intake ｜ Cooling Mode Adaptive Airflow System 50°C Chamber Ready For Engineering-Grade Filaments. The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping, all while maintaining clean, safe air quality in your workspace. Heat Preservation ｜ Carbon Filter Peace Of Mind, Everytime You Print. The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job. AI Error Detection ｜ 2 TOPS NPU Start Check Spaghetti Nozzle Clumping Purge Chute Jam30-Second Nozzle Swap. The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors. Quick Swap Hotend ｜ 1-Clip Design No-Lag Liveview & High-Quality Timelapse. Enhanced LED lighting dramatically improves the clarity of your liveview video and timelapses. Paired with a high-frame-rate camera & Dual-band Wi-Fi, you can comfortably monitor your printer remotely and capture beautifully illuminated timelapses perfect for sharing on social media. "Stage" Lighting ｜ 1080P High-Rate Camera Reliable for Fiber-Reinforced Material Printing. P2S's extrusion system and nozzle are crafted from hardened steel, offering exceptional durability and wear resistance. Designed specifically for stable, long-term printing of high-performance fiber-reinforced materials. Hardened Steel Nozzle ｜ Hardened Steel Extruder Gear AMS 2 Pro Multi-Color Printing & Filament Drying, All in One Box. Experience our most reliable multi-color printing system yet. The AMS 2 Pro features an enhanced design for a better user experience and, crucially, introduces long-awaited filament drying. A pioneering active venting system dries filament 30% faster than sealed heating, maintaining low humidity for superior storage and print quality. Auto Venting Filament Drying ｜ Multi-Color Printing Electromagnetic Air Vent Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing. Faster Multi-Color Printing The PMSM feeding motor accelerates filament feeding by 60%, saving an average of 10 minutes for every 100 filament changes. Perfection, Detail by Detail.The P2S features numerous refinements that enhance the user experience. While these incremental improvements may not be immediately apparent, they embody the level of perfection Bambu Lab constantly pursues. Built-in 2-in-1 Buffer (equipped with AMS combo)Effortlessly switch between your AMS and external filament spools for maximum flexibility. Flat Base Plate The smooth, flat surface makes it simple to swipe out all residue, keeping your printer clean. Integrated Lift Handles Designed for safe and easy transport, these sturdy handles protect your hands and provide a secure grip when moving the printer. Shatter-Safe Front Glass Engineered for safety, the front glass is protected by a film built to resist shattering, protecting you and your workspace. P2S Specs Item Specification Printing Technology Fused Deposition Modeling Body Build Volume (W*D*H) 256*256*256 mm³ Chassis Plastic and Steel Outer Frame Plastic and Glass Physical Dimensions Physical Dimensions 392*406*478 mm³ Net Weight 14.9 kg Toolhead Extruder Gear Hardened Steel Nozzle Hardened Steel Max Nozzle Temperature 300 °C Included Nozzle Diameter 0.4 mm Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm Filament Cutter Built-in Filament Diameter 1.75 mm Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor Heatbed Build Plate Material Flexible Steel Plate * To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes. Download TDS Bambu Lab P2S AMS 2 Pro (combo version) Filament Buffer (combo version) Buildplate Accessory Box Spool Holder Frequently Asked Questions What materials are the P2S pre-installed extruder gears and nozzle made of?- Hardened steel. Does the P2S require an external power supply to use the dry filament function when connected to the AMS 2 Pro?- You can use the AMS 2 Pro's drying function while the entire machine is in standby, though printing-related functions will be paused during drying. If you need to dry filament while printing, you'll need to purchase a Bambu Lab official power adapter to power the AMS 2 Pro. Are the P2S buildplate and the XPA series buildplates compatible?- The P2S buildplate's recognition function has been optimized. Older build plates do not support the type recognition feature, but their external dimensions are consistent, so they can still be used for printing. The left side of the P2S has some mounting points. Does it support installing an auxiliary part cooling fan?- You can purchase an official auxiliary cooling fan for upgrading. Can the P2S use the nozzle of A1 and H2D?- It's compatible with H2D nozzles but not with A1 nozzles. How many AMS units can the P2S connect to at most?- It supports connecting to 4 AMS 2 Pro units and 4 AMS HT units, totaling 8 AMS units with 20 slots. This means it supports up to 20-color printing. Does the P2S support chamber temperature control, and how is the temperature controlled?- The P2S does not have an active chamber heating function, but it can regulate chamber temperature through its enclosed chamber and automatic switching flap between internal and external circulation. Why did the P2S stop using carbon rods?- To allow for easier maintenance. Dirt residual is much simpler to clean off the surface of a smooth rod. Will the P1S stop being sold?- There are no plans for that at the moment. Please stay tuned for official announcements. USA Orders Orders to the US are subject to all US tariffs for the country of manufacture of the given product (Bambu Lab -> China). This is collected by the given freight company. CAZ 3D does not collect any duties or tariffs up front. If delivery is refused and the product is sent back to us, we will subtract shipping costs to and from the delivery location on top of a USA specific restocking fee of 25% due to additional clearance requirements. Show more