Bambu Support for ABS Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow! Easy Support Removal Specially formulated for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This streamlines your post-processing work, ensuring a more efficient workflow. Your browser does not support the video tag. Superior Support Interface Quality Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints. RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Printing Tips • Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety. • Pungent and unpleasant odors may be released during printing. Make sure your printer is enclosed and placed in a well-ventilated area. • When layer strength is required, it is recommended to increase the flushing volume to above 800 mm³. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface. • By increasing the "initial layer speed", a more peelable support can be obtained. However, this will increase the risk of warping. • Dry out before use for higher print quality. Drying conditions: 80℃ for 4 hrs in the blast drying oven; 85 - 95 ℃ for 6 hrs in the X1 Series Heatbed. Please refer to Filament drying instructions on WIKI. • For more support-related settings, please refer to Support on WIKI. What's in the Box Filament with Spool*1 & Desiccant*1 Package*1 Parameters Comparison Learn more different filaments comparison on Bambu Filament Guide >> Support for PLA/PETG Support for PLA Support for ABS Support for PA/PET PVA Color Nature White & Black White Green Clear Nozzle Type All Size / Material All Size / Material 0.4 / 0.6 / 0.8 mm 0.4 / 0.6 / 0.8 mm Hardened Steel All Size / Material Nozzle Temperature 190 - 220 °C 220 - 230 °C 240 - 270 °C 280 - 300 °C 220 - 250 °C Bed Temperature 35 - 60 °C 35 - 45 °C 80 - 100 °C 80 - 100 °C 35 - 45 °C Printing Speed < 100 mm/s < 200 mm/s < 100 mm/s < 100 mm/s < 200 mm/s Solubility Water-insoluble Water-insoluble Water-insoluble, limonene-dissolvable Water-insoluble Water-dissolvable Dry before Use Optional Optional Optional Required Required Dry Protection during Use Optional Optional Optional Required Required Filament Compatibility PLA, PETG PLA ABS PAHT-CF,PA6-CF,PA6-GF, PET-CF PLA, PETG Accessory Compatibility Recommended Not Recommended Build Plate Smooth PEI Plate, Textured PEI Plate Cool Plate SuperTack Hotend Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm Hotend with Hardened Steel Nozzle 0.2 mm Hotend with Stainless Steel Nozzle 0.2 mm Bambu Liquid Glue / Glue Stick Bambu Liquid Glue / Glue Stick / Recommended Printing Settings Drying Settings (Blast Drying Oven) 80 °C, 4 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 240 - 270 °C Bed Temperature (with Glue) 80 - 100 °C Printing Speed < 100 mm/s Physical Properties Density 1.16 g/cm³ Vicat Softening Temperature N / A Heat Deflection Temperature N / A Melting Temperature 195 °C Melt Index 11.6 ± 0.7 g/10 min Mechanical Properties Tensile Strength N / A Breaking Elongation Rate N / A Bending Modulus N / A Bending Strength N / A Impact Strength N / A Downloads Filament TDS Filament MSDS Filament RoHS
