Available at our Townsville store perfect for when you need one in a hurry! Real High Flow: Save Up to 30% of Your Time The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills. 1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.2. Tested with PLA Basic, 15% infill, 300x300x300mm cube. PLA Basic PLA Matte PETG HF Bambu Hardened Steel Nozzle (0.4mm) 24 mm³/s 28 mm³/s 24 mm³/s Bambu High Flow Nozzle (0.4mm) 40 mm³/s 48 mm³/s 32 mm³/s Bambu High Flow Nozzle (0.6mm) 40 mm³/s 40 mm³/s 40 mm³/s Bambu High Flow Nozzle (0.8mm) 40 mm³/s 40 mm³/s 40 mm³/s High-Speed Precision: Sharp Details Every Time Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time. Upgrade now and print faster without compromise! Printer Compatability H2 Series X1/P1 Series A1 Series Supported Not Supported Supported* *Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series. Filament Compatibility Filament 0.4 mm High FlowHardened Steel 0.6 mm High FlowHardened Steel 0.8 mm High FlowHardened Steel PLA Basic √ √ √ PLA Matte √ √ √ PLA Basic Gradient √ √ √ PLA Silk+ √ √ √ PLA Silk Dual Color √ √ √ PLA Silk √ √ √ PLA Metal √ √ √ PLA Marble √ √ √ PLA Sparkle √ √ √ PLA Wood √ √ √ PLA Galaxy √ √ √ PLA Glow √ √ √ PLA-CF Not recommended √ √ PLA Aero √ √ √ PETG HF √ √ √ PETG Translucent √ √ √ PETG-CF Not recommended √ √ ABS √ √ √ ABS-GF √ √ √ ASA √ √ √ ASA Aero √ √ √ ASA-CF Not recommended √ √ PC √ √ √ PC FR √ √ √ TPU for AMS √ √ √ TPU 95A HF √ √ √ TPU 85A X X X TPU 90A X X X PAHT-CF Not recommended √ √ PET-CF √(Only for Left Hotend) √(Only for Left Hotend) √(Only for Left Hotend) PA6-CF Not recommended √ √ PPA-CF √(Only for Left Hotend) √(Only for Left Hotend) √(Only for Left Hotend) PPS-CF √(Only for Left Hotend) √(Only for Left Hotend) √(Only for Left Hotend) Support for ABS √ √ √ Support for PLA/PETG √ √ √ Support for PA/PET √ √ √ Support for PLA (New Version) √ √ √ PVA √ √ √ PA6-GF Not recommended √ √ Learn more about filament compatibility on Bambu Lab Wiki. Quick Swap Nozzle Design *Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns. *Learn more about replacing the Hotend on Bambu Lab Wiki In the Box High Flow Hotend High Flow Hotend with hardened steel nozzle - 0.4 mm * 1 Product Specifications Max. Printing Temp. 350 ℃ Length 49.2 mm Packaging Weight 0.028 kg Packaging Size 60*60*30mm
